Timing help wanted
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 328
Likes: 0
From: 604, Canada
Timing help wanted
I am running a B16 with a P30 stock bottom end and head milled .020 with Buddy Club 3+ cams, megan 2.5" header, test pipe and 2.5" mandrel header back.
I am wondering what others with similar builds are using for total timing values. At WOT I am up to approx. 30 degrees at the top end. I don't have a dyno available yet, so all I am asking for is just a little guidance here. I am still OBD0 and using BRE, so if you want to post your bin, that is what I use.
I am wondering what others with similar builds are using for total timing values. At WOT I am up to approx. 30 degrees at the top end. I don't have a dyno available yet, so all I am asking for is just a little guidance here. I am still OBD0 and using BRE, so if you want to post your bin, that is what I use.
Thread
Thread Starter
Forum
Replies
Last Post
lsvtec_hatchback
Hybrid / Engine Swaps
3
Mar 25, 2009 08:33 PM
brokenojoke
Engine Management and Tuning
2
Jul 8, 2008 02:45 PM