Prestine WORK Equip 03's for sale........15 x 7.5.........staggered lips
Wheels:
WORK EQUIP 03's
Specs:
Front Rims: (2) 15 x 7.5 (44mm offset w/ Type A disk) = 32mm lip = 1.5"
Rear Rims: (2) 15 x 7.5 (42mm offset w/ Type O disk) = 45mm lip = 2"
Stretched Rubbers:
(4) Yokohama ES100 Tires all around
195 / 50 series
Condition:
4k on the wheels..........Pampered/Perfect/No blemishes, dents, scratches
Tires have 4k also........90% tire life
For NON rolled fender people, these wheel specs fit the WORK's perfectly flush with the body of civics/integras. This is the craziest Equip dish you can run. The 195 series tire allows it to still tuck into both the front and rear fenders like butter. I did not have to modify anything. Keep in mind that these rims will give your car the staggered look as the Front lip is 1.5" deep and the Rear lip is 2" deep. You cannot rotate the rims at all. Also keep in mind that old school rims, even though they are reproduced by WORK are based off technology from the 1970's so they are made to work under certain conditions. Back then they didn't have crazy brake systems, so I had to put up with not being able to rotate my rims. Can't tell you how many times i've gotten the drive by thumbs up over these though. These are as aggressive as they are going to get for STOCK fenders. I waited 4 months to get mine.
offers over $1500 only
+plus shipping+




WORK EQUIP 03's
Specs:
Front Rims: (2) 15 x 7.5 (44mm offset w/ Type A disk) = 32mm lip = 1.5"
Rear Rims: (2) 15 x 7.5 (42mm offset w/ Type O disk) = 45mm lip = 2"
Stretched Rubbers:
(4) Yokohama ES100 Tires all around
195 / 50 series
Condition:
4k on the wheels..........Pampered/Perfect/No blemishes, dents, scratches
Tires have 4k also........90% tire life
For NON rolled fender people, these wheel specs fit the WORK's perfectly flush with the body of civics/integras. This is the craziest Equip dish you can run. The 195 series tire allows it to still tuck into both the front and rear fenders like butter. I did not have to modify anything. Keep in mind that these rims will give your car the staggered look as the Front lip is 1.5" deep and the Rear lip is 2" deep. You cannot rotate the rims at all. Also keep in mind that old school rims, even though they are reproduced by WORK are based off technology from the 1970's so they are made to work under certain conditions. Back then they didn't have crazy brake systems, so I had to put up with not being able to rotate my rims. Can't tell you how many times i've gotten the drive by thumbs up over these though. These are as aggressive as they are going to get for STOCK fenders. I waited 4 months to get mine.
offers over $1500 only
+plus shipping+




Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
StinkyTurbo
Northeast (Sales)
5
Mar 1, 2011 06:21 AM
ITRpwrdEG
For Sale
18
May 8, 2006 10:01 AM
Transport
For Sale
49
Jan 9, 2005 11:00 PM
smeister
For Sale
7
Dec 23, 2004 10:43 AM



x10



