i got a set of ground control coilovers for sale, will fit eg/dc/ek. these are the GC's with the regular sleeves. all 4 bolts in them have been replaced with hardware from GC, as well as one perch is brand new, comes with the upper black rubber mounts brand new, **** NOT the extended mounts!!!!**** i paid $55 just for one perch, 4 new bolts and 4 rubber mounts. coilovers are in good shape, i just cleaned them a while back.

spring rates and info:
7in x 250lbs
8in x 325lbs


price is $200 shipped.


i've got many many vouches on here, like 70+ people. feel free to PM or post with any questions.









THANX!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

1st bump!

 

bump for a good smeller....i mean good seller

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by t1typer &raquo;</TD></TR><TR><TD CLASS="quote">bump for a good smeller....i mean good seller </TD></TR></TABLE>


i just farted

 

ttt

 

What car were they orginally for?

 

came off a 99si, but they are the same diameter springs and sleeves for ek/eg/dc.

 

What shocks did you use with these?

 

bump for an awesome seller

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">What shocks did you use with these?</TD></TR></TABLE>

i had them on OEM struts but they fit others also, these sleeves are the standard off-the-shelf sleeve for the civic's and tegs. only strut i've heard to not run these on is koni because they dont have the koni specific sleeves.


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bmw626 &raquo;</TD></TR><TR><TD CLASS="quote">bump for an awesome seller</TD></TR></TABLE>


thanx alot man!!!! hows the build going?

 

So KYB AGX's would work fine?

How long were they used for?

 

I have the acl bearing kit, water pump, oil pump, head gasket, timing belt, oil pan tapped, and a new thermostat dropped in. Also its already rehoned and notched. All I need now is Pistons and Rods, drop them in, take my z6 head off my b7 block, and swap it over and get the other little stuff like injectors, catch can, fpr, ect ect. get my ecu chipped and get a basemap and go from there. it should be done by around late June hopefully

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">So KYB AGX's would work fine?

How long were they used for? </TD></TR></TABLE>


i would say yes since they have the OEM style spring perches, if u wanna double check, the guys at ground control are very nice and helpfull, u could shoot them a call or email


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bmw626 &raquo;</TD></TR><TR><TD CLASS="quote">I have the acl bearing kit, water pump, oil pump, head gasket, timing belt, oil pan tapped, and a new thermostat dropped in. Also its already rehoned and notched. All I need now is Pistons and Rods, drop them in, take my z6 head off my b7 block, and swap it over and get the other little stuff like injectors, catch can, fpr, ect ect. get my ecu chipped and get a basemap and go from there. it should be done by around late June hopefully</TD></TR></TABLE>

cool, i've had some complications with my sleeved block, looking at another $500-700 and 2-3 month wait, thought i'd have it swapped within the next 2 weeks. so this was bad news

i have a friend in wilmington that sells p06 ecus converted to p28 and socketed, he does very good work and has many vouches on HMT.com. prices are good, u could break even if u sell ur p28 stock to someone

 

bump

 

yea man

 

back up!

 

can include the OEM upper strut mounts for $25

 

biggity bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Capsule Kid &raquo;</TD></TR><TR><TD CLASS="quote">biggity bump</TD></TR></TABLE>


thanx for the bump man!!!

 

sold to me

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">sold to me </TD></TR></TABLE>


thats right! smooth transaction too, hope u enjoy them!!

 

sorry man i got a little too excited