Like the topic say.

 

Check the sticky up top brah...

 

Why not just order one from the dealership?

Oh, and there is no ITR specific car cover.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">Why not just order one from the dealership?

Oh, and there is no ITR specific car cover. </TD></TR></TABLE>

I don't think it will fit due to the ITR rear spoiler I know some on that had a LS Integra with a ITR Rear Spoiler and the car cover did not fit right in the rear.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PHAT-INTEGRA &raquo;</TD></TR><TR><TD CLASS="quote">

I don't think it will fit due to the ITR rear spoiler I know some on that had a LS Integra with a ITR Rear Spoiler and the car cover did not fit right in the rear.</TD></TR></TABLE>

Dunno if it's specific or not, but mine fits just fine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PHAT-INTEGRA &raquo;</TD></TR><TR><TD CLASS="quote">I don't think it will fit due to the ITR rear spoiler I know some on that had a LS Integra with a ITR Rear Spoiler and the car cover did not fit right in the rear.</TD></TR></TABLE>

It fits just fine with the OEM spoiler.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by neo_ &raquo;</TD></TR><TR><TD CLASS="quote">My plain "integra" car cover fits just as fine.</TD></TR></TABLE>

Which is the same one that I have. I'm 100% certain there is not a seperate car cover available through Honda for the USDM ITR.

 

I look into it more because It does not make any sense of the OEM spoiler on the LS/SE/GS is lower and the ITR spoiler sets much higher. If you put a regular LS cover on a ITR the back rear cover will be raised up and not covering the bottem due to the Spoiler hight on the ITR.

 

Not sure if there is an ITR specific car cover like the others have stated... I have two Integra car covers and they cover my cars fine.... the one thing that it doesn't cover so well are just the rear valences since the wing is on there

 

Oh noes - there is 2" of bumper exposed!!!!11!11!!

If you're that ****, have a customer cover made for the damn thing.
http://www.calcarcover.com/cover_main.aspx

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">Oh noes - there is 2" of bumper exposed!!!!11!11!!

If you're that ****, have a customer cover made for the damn thing.
http://www.calcarcover.com/cover_main.aspx</TD></TR></TABLE>

gotta love my wife she had one made for my R last winter since my first one got chewed into swiss cheese by fuggin squirrels.

now lock this up.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">Oh noes - there is 2" of bumper exposed!!!!11!11!!</TD></TR></TABLE>

No, there isn't even that. See below.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PHAT-INTEGRA &raquo;</TD></TR><TR><TD CLASS="quote">I don't think it will fit due to the ITR rear spoiler I know some on that had a LS Integra with a ITR Rear Spoiler and the car cover did not fit right in the rear.</TD></TR></TABLE>

Not true.

I got the OEM car cover when I bought my '94 GS-R. (I know it's the OEM one because the Integra logo is silkscreened on the front.) It's the multi-layered gray fabric, probably Technalon 4.

When I use it on my ITR (which I do, all the time), it fits fine. In the rear, it reaches down a couple inches past the corners at the bottom of the rear bumper where the bumper turns inward (and the elastic brings it in there), so the rear bumper is not at all exposed. The only thing it does not fully cover is about the bottom half inch or so of the license plate frame.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxtasy &raquo;</TD></TR><TR><TD CLASS="quote">

No, there isn't even that.</TD></TR></TABLE>

Well yours fit differently than mine then. Perhaps yours has stretched out a little over time? Mine too is OEM, but only a few months old.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">Perhaps yours has stretched out a little over time?</TD></TR></TABLE>

Perhaps. &lt; shrug &gt;

In either case, it's perfectly usable...

 

I have one for sale in my F/S thread. Check my sig for the link.