lsvtec at track
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 427
Likes: 0
From: columbia, tn, united states
i have an ls vtec in a 94 civic hatch. head is stock besides a slight port job the shop that reworked my head did for me. the bottom end has cp 12:0 to 1 cr pistons. eagle h-beam rods. bored 20 over w/ blockguard. dc sports 4:1 header. act extreme 2 pressure plate and st1 organic clutch, and a gsr tranny and a chipped p28 ecu i got when i had my single cam non vtec motor.
im wondering what this set up should run in an 8th mile track. my 1.6 nonvtec w/ just a header ran a 10.2@70 or 71 mphscarred to run drag radials cause i already popped one trannybut probably will any ways no trac. w/ tires. im planning on going to our track this weekend so i was just wondering
im wondering what this set up should run in an 8th mile track. my 1.6 nonvtec w/ just a header ran a 10.2@70 or 71 mphscarred to run drag radials cause i already popped one trannybut probably will any ways no trac. w/ tires. im planning on going to our track this weekend so i was just wondering
i used radials a couple times and they were worse than street tires
get some slicks 22 inch
no clue bout the 1/8 time i have onyl ran on 1/4
Modified by slodel at 6:41 AM 4/25/2006
get some slicks 22 inch
no clue bout the 1/8 time i have onyl ran on 1/4
Modified by slodel at 6:41 AM 4/25/2006
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 427
Likes: 0
From: columbia, tn, united states
we had a guy down here that was supposedly running a pretty much stock ls vtec. he said he had ordered a dh racing motor he blew the bottom end or something so got a nem onethey said they werent really sure if the head was ported( it was supposed to be). he supposedly had itr pistons w/ls rods. same clutch set up as me and a b16 tranny stock intake manifold and the same header as me he was helping me a little with mine as far as what to get.his best time on slicks was an 8 sec flat. one of his friends said he ran a 8.5 on radialsdont know about that though but i saw the 8 sec pass. ran stock ecu with vafc2. made a pass last year in my when just got it together only ran 9.8 on tires. it was a big dissapointment to me i was planning on a big jump from my completley stock d16 non vtec then i popped the tranny and just got it fixed so idont know i hope slicks make a big improvement. and im not really sure if the chipped p28 isnt hurting me but i dont know. so any help will be appreciated????
Thread Starter
Honda-Tech Member
Joined: Apr 2006
Posts: 427
Likes: 0
From: columbia, tn, united states
just got back from the 1/8 track tonight. the car ran a9.5@76mph and a 9.5@75mph on street tires. also ran a couple 9.7s and a couple 9.8s and a couple 9.9s. i had a trap speed of 85 mph on one of the runs
Thread
Thread Starter
Forum
Replies
Last Post
Civicman86
Drag Racing
14
May 10, 2005 03:22 PM



