Now, I didnt import my jdm teg for the purpose of taking it up the strip but a few of us from the Honda-revs club are going to an event this Easter Sunday. And I was wondering if you guys have any little tips for a beginner.

Heres the car
http://uk.geocities.com/andrew...4.JPG

I've just stuck 4point harness in for track work so I've stripped the rear to use the back belt mounts. I also removed the spare and the jack etc. Hopefully this will all save a bit of weight. Because its jdm it didnt have the rear sound deadening that the UKDM tegs had. I also have a fibreglass bonnet to fit. Other than that I've got my oem rims to stick on the front to save my new REO40's. Am I right in thinking 15psi in this will be good enough for decent grip?
And I've also got a jerry-can so I can run the minimum fuel possible. Thats about as much prep as I've done. The car is a standard 200ps jdm spec with spoon drop in and cat removed.

Hoping for 14.5

 

there's a little write up about preparing for the track on here.

http://www.THESPEEDLOUNGE.COM