1990 CRX SI
Thread Starter
Honda-Tech Member
Joined: Jan 2005
Posts: 1,153
Likes: 0
From: Fat girl city
1990 CRX SI
Red exterior/ black interior
JDM 2Cam ZC motor with Si tranny
Wings West kit
231K miles. Motor was installed at 193K
B&M short shifter
4 wheel discs with drilled rotors and brand new pads
new cv axles
Will come with a Momo hub and NSX-R horn button
Have a EF8 front end and back seat can throw in for a fee
a little rough but decent for the price
will have pics later
$1000
Sorry for the breifness earlier...Will give some details....
The car was run off the road by the ole man ("got away from him" lol)....have another fender and headlight. The drivers seat looks like every other crx seat...like magilla gorilla sat in it for years.....
For $800 more can throw in a ef8 front end, ef6 rear bumper and the back seat and panels....the car runs good and gets good gas mileage. Needs valve seals, smoke on initial throttle. It's not the rings, the compression was tested and ran 190 across the board. And a windshield.... Has an AEM intake, new shocks, cv axles and a new air fresherner to get that ole 4th gen smell down alittle...
Modified by two_cam_ham at 4:04 PM 4/11/2006
JDM 2Cam ZC motor with Si tranny
Wings West kit
231K miles. Motor was installed at 193K
B&M short shifter
4 wheel discs with drilled rotors and brand new pads
new cv axles
Will come with a Momo hub and NSX-R horn button
Have a EF8 front end and back seat can throw in for a fee
a little rough but decent for the price
will have pics later
$1000
Sorry for the breifness earlier...Will give some details....
The car was run off the road by the ole man ("got away from him" lol)....have another fender and headlight. The drivers seat looks like every other crx seat...like magilla gorilla sat in it for years.....
For $800 more can throw in a ef8 front end, ef6 rear bumper and the back seat and panels....the car runs good and gets good gas mileage. Needs valve seals, smoke on initial throttle. It's not the rings, the compression was tested and ran 190 across the board. And a windshield.... Has an AEM intake, new shocks, cv axles and a new air fresherner to get that ole 4th gen smell down alittle...
Modified by two_cam_ham at 4:04 PM 4/11/2006
Honda-Tech Member
Joined: Sep 2005
Posts: 598
Likes: 0
From: West Columbia, SC, USA
Re: 1990 CRX SI (two_cam_ham)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by two_cam_ham »</TD></TR><TR><TD CLASS="quote">Red exterior/ black interior
JDM 2Cam ZC motor with Si tranny
Wings West kit
231K miles. Motor was installed at 193K
B&M short shifter
4 wheel discs with drilled rotors and brand new pads
new cv axles
Will come with a Momo hub and NSX-R horn button
Have a EF8 front end and back seat can throw in for a fee
a little rough but decent for the price
will have pics later
$1000</TD></TR></TABLE>
Do you have any pics of the car? I'm located in Columbia, SC and I am interested in the car and I also know someone else that is interested.
JDM 2Cam ZC motor with Si tranny
Wings West kit
231K miles. Motor was installed at 193K
B&M short shifter
4 wheel discs with drilled rotors and brand new pads
new cv axles
Will come with a Momo hub and NSX-R horn button
Have a EF8 front end and back seat can throw in for a fee
a little rough but decent for the price
will have pics later
$1000</TD></TR></TABLE>
Do you have any pics of the car? I'm located in Columbia, SC and I am interested in the car and I also know someone else that is interested.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
