Okay, I got some sensors that I have no clue where they plug into. This is a b16a2 usdm into a 93 eg si. One plug is the one that is sitting right behind the intake manifold. Its small and I was wondering if its the same one as the one from my z6 tb?? also, the plug that is connect to the a sensor on the fuel line. The big one that is connected to the red hose where does it go?? Heres the picture. Also about the one on the tranny, where does that one go into?? cause my z6 tranny has a black cap that blocks it off instead of the si tranny where it has the black cap but has that plug.

 

Picture 1: Looks like the cruise control vacuum nipple.

Picture 2: Don't know

Picture 3/4: It's a vent for the tranny. No sensor, no need to do anything else.

 

#2 is the evap purge solenoid. Plugs into the evap purge canister and the IM.

 

for the cruise control vacuum. I can just leave it right? cause I dont know where to plug that into the eg..

 

Plug it up. Use a cap of some type. I think you can buy them at Autozone/Advance/Pep Boys, etc.