SOLD

I have a set of Raxle b-series axles for a swapped crx.

These are very strong axles, and hold up to 350 hp.

They are also an exact fit and will not cause binding like the integra axles do.

http://www.raxles.com/hybrids.aspx

Only problem with these are that the3 boot got pulled out when I tries using them in a ZC swap. They were a little too short, and when i cut the wheel all the way the boot popped off.

All these need is for the boot to be repacked with grease, and clamped back together (the boot is not damaged.

The cost about $350 (after shipping) from raxle .....I will sell for $175

You may also need the integra intermediate shaft...I have one for an extra $50

Boot that popped off ( no rips ) clip still attached



Modified by Joao at 9:21 PM 4/25/2006

 

 

get them while you can, dont waste your money on those binding integra axles.

 

Dongt have a honda anymore and dont need these.....who is gonna take em?>

 

uppppp. someone wants em

 

where are the serious honda heads?

 

up

 

up

 

up again

 

will these work with a cable tranny? Are they damaged at all. obviously i see the pic of the popped off boot, but do they click/grind at all? Thanks,
Chris

 

I had these on a cable tranny, they work with any b-series tranny. before the boot popped off they were perfect! no clicks no nothing!

 

what is the part number for these?

 

not positive...but I would say it is this one "RAXBGEN4Y1"

They are both the same length, so it will require the intermeddiate shaft.

 

 

will trade for vw stuff.

 

up up up

 

up

 

up..

 

uuuu

 

up

 

 

sold....