just as the title says, The Motor is a B18A LS Longblock, built from the bottom up. Golden eagle sleeved, endyn 84mm pistons (2.0L bore) eagle rods, 2 of which need to be replaced due to the motor running low on oil. The crank and rod bearings also both need to be replaced, 2 inexpensive parts. The head has a five angle valve job, stock cams and valve springs/retainers, skunk 2 cam gears, aem fuel rail, skunk 2 intake manifold. I do not have a set of injectors, so that is the only other thing you will need to complete this motor. minor rebuild on the block and injectors and this motor is capable of good numbers. Put together in my car with basic t3/t4 setup it made 286whp at 16psi. The motor has about 5k since being rebuilt. only boosted on for a few months. Motor originally built and tuned by JE Import Performance. Im taking offers right now, the motor is sitting in a buddys garage and id like to get it out of there soon, so feel free to bargain with me. Local pickup in MD preferred, and also willing to drive some distance to meet up, but can ship at buyers expense...also willing to part out so let me know what you need. I have a few people that can vouch for me on here, as i have done business with quite a few people, also have 100% positive on ebay. Im me on aim at gstintegra92 or post here if interested or have any questions, thanks for looking!

UPDATED PICS below




Modified by gstintegra92 at 7:16 PM 4/9/2006


Modified by gstintegra92 at 5:24 PM 4/12/2006

 

why was it low on oil????? was it burning it, I am an hour north of you an interested....pm with a asking price

 

taking offers, also willing to part out

 

I'm interested in the pistons and bare block with mains caps if you're willing to part out. Let me know how much ship to 70802 (business address)

 

you say its fully built, but it it needs new bearings, needs two new rods, has a stock valvetrain, and missing injectors. Not to mention it only made 268whp on 16psi, and had no oil. somethin aint right here...

 

yea it was fully built, and i didnt have enough money to fix it. I sold the injectors already, and it made 286whp at 16psi, not 268, because of a boost leak on the dyno. The motor is fine it just needs to be rebuilt. so please read before you try to jack my thread thanks.

 

if anyone can resize pics for me, ill post em up

 

Bump for a couple pics added, will have more later tonight!
http://www.we-todd-did-racing....x.jpg




Modified by gstintegra92 at 5:20 PM 4/12/2006

 

golden eagle sleeved block pic 1

http://www.we-todd-did-racing....x.jpg

golden eagle sleeved block pic 2.....
http://www.we-todd-did-racing....x.jpg

endyn 84.5mm pistons....... still look brand new
http://www.we-todd-did-racing....x.jpg

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by strongarm1731 &raquo;</TD></TR><TR><TD CLASS="quote">you say its fully built, but it it needs new bearings, needs two new rods, has a stock valvetrain, and missing injectors. Not to mention it only made 268whp on 16psi, and had no oil. somethin aint right here...</TD></TR></TABLE>

i say the same. I've seen a leak on the dyno and it still wasn't that low

 

good for you....... if your not interested dont post please thanks

 

PM'D

 

replyed up for friday

 

bump sale pending........

 

sold for $500 what a steal!