***anymore pics of this hatch***
Trending Topics
Junior Member
Joined: Mar 2005
Posts: 709
Likes: 0
From: Not paying sales Tax, NH, US
Re: ***anymore pics of this hatch*** (cre18)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cre18 »</TD></TR><TR><TD CLASS="quote">here ya go 
</TD></TR></TABLE>
what lip is that and where the hell can i get it, ive seen it on password but not anymore if any one cares to help post up a link or PM thanks in advance
</TD></TR></TABLE>
what lip is that and where the hell can i get it, ive seen it on password but not anymore if any one cares to help post up a link or PM thanks in advance
Honda-Tech Member
Joined: Nov 2001
Posts: 18,266
Likes: 0
From: Las Vegas, u.s
Re: ***anymore pics of this hatch*** (WishinItWas)
its a polyurathane spoon style lip. You can get it at jdmshit.
http://www.jdmshit.com/parts/exterior/EGspoonPU/
http://www.jdmshit.com/parts/exterior/EGspoonPU/
Honda-Tech Member
Joined: May 2005
Posts: 13,296
Likes: 0
From: murrrrland
Re: ***anymore pics of this hatch*** (-Gambit-)
Well folks we have another winner on our hands. Congratulations man. From the pictures you had taken and you build list I would have to say it was well deserved. This is a magazine quality feature right here. Good job on everything.
1994 Honda Civic DX 3Dr.
Location: San Dimas, Ca
Engine:
B18c JDM GSR w/ LSD
ARC induction Box
ARC power Chamber
Skunk 2 Pro Series Intake manifold
Jun Programed ECU Chip
JDM Aftermarket Headers (Brand unknown) 4-2-1
Enjo Competion Polly urethane motor and Trans solid mounts
Suspension:
ITR front Control Arms
GSR rear control arms
JDM ITR Front Sway bar
JDM ITR Rear Sway bar
ITR Zeal Function B6 Coil Overs
Next Miracle X bar
Auto Power Roll Bar (Race) w/ harness bar
Spoon Sports Lower Tie Bar
Spoon Sports Front upper strut bar
Spoon Sports Street Type Rear Section
Custom 2.25" Piping W/ Gutted out Cat-Co cat.
Brakes:
GSR Master Cylinder
GSR Brake Booster
GSR Front Brake conversion (complete)
Brembo slotter Rotors
Earl's Steel Braided Brake lines
GSR rear Brake Conversion (Complete)
GSR hand Brake cables
Ferado 2500 series carbon Front pads
Hawk HP Plus rear pads
Project Mu Racing Brake Fluid
GSR preportioning Valve
Interior:
Recoro SRD
Auto Power 4 point cam lock harness
Spoon Sports Steering wheel
HKB short hub
L2 Detachable Hub
Eclipse Head unit
Eclipse internal speakers
JL Audio 250 Monoblock Amp
JL Audio 10" W1
JDM EG6 SiR II Gauge Cluster
Blitz BLM oil Pressure Guage
Spoon Sports Shift ****
Exterior:
USDM Si Front Lip
USDM (new) Headlight Housing
USDM Fog light Kit (OEM)
New OEM Phantom Meca Grey Paint Job
Maroon Custom Pearl
JDM OEM SiR Rear Decal
USDM Si DOHC V tec Side Decals
JDM OEM Thin Side Moldings
Spoon Sports Carbon Fiber Mirrors
Spoon Sports Carbon Fiber Duck Bill
GTP sports Carbon Hood
JDM OEM Stanley Corners
JDM OEM Tail lights
Mc Culligh HID 5000 K headlight H4 kit (white)
Mc Cullign HID 3000 K Fog light H3 Kit (yellow)
Wheel and Tire:
15x7 ET+ 38 Work Meister S1 (2pc) Custom Ordered Millano Red center - Ordered From work in Japan.
Toyo Proxes 205-50-15
ALEX want to send Special Thanks to:
Matt @ Status Auto Design
http://www.Statusautodesign.com
(310) 937-8382
Koko @ Super Tunning Exhaust
(818) 988-2335
James @ 16 18 22
Daniel @ Digital Horizon
http://www.digitalhorizon-online.com
Edmun @ Opak Racing
http://www.Opakracing.com
or Spoonsports.us
Jasper @ Options Autosalon
http://www.Optionsauto.com
Mark Vega
Jim & Alan @ Toda Racing @ WorkWheels
http://www.TodaRacing.com
Special thanks to Mark Vega, Kety Chu, JDM Kids, Matt Douglass, Lukaz, and Timmuh
1994 Honda Civic DX 3Dr.
Location: San Dimas, Ca
Engine:
B18c JDM GSR w/ LSD
ARC induction Box
ARC power Chamber
Skunk 2 Pro Series Intake manifold
Jun Programed ECU Chip
JDM Aftermarket Headers (Brand unknown) 4-2-1
Enjo Competion Polly urethane motor and Trans solid mounts
Suspension:
ITR front Control Arms
GSR rear control arms
JDM ITR Front Sway bar
JDM ITR Rear Sway bar
ITR Zeal Function B6 Coil Overs
Next Miracle X bar
Auto Power Roll Bar (Race) w/ harness bar
Spoon Sports Lower Tie Bar
Spoon Sports Front upper strut bar
Spoon Sports Street Type Rear Section
Custom 2.25" Piping W/ Gutted out Cat-Co cat.
Brakes:
GSR Master Cylinder
GSR Brake Booster
GSR Front Brake conversion (complete)
Brembo slotter Rotors
Earl's Steel Braided Brake lines
GSR rear Brake Conversion (Complete)
GSR hand Brake cables
Ferado 2500 series carbon Front pads
Hawk HP Plus rear pads
Project Mu Racing Brake Fluid
GSR preportioning Valve
Interior:
Recoro SRD
Auto Power 4 point cam lock harness
Spoon Sports Steering wheel
HKB short hub
L2 Detachable Hub
Eclipse Head unit
Eclipse internal speakers
JL Audio 250 Monoblock Amp
JL Audio 10" W1
JDM EG6 SiR II Gauge Cluster
Blitz BLM oil Pressure Guage
Spoon Sports Shift ****
Exterior:
USDM Si Front Lip
USDM (new) Headlight Housing
USDM Fog light Kit (OEM)
New OEM Phantom Meca Grey Paint Job
Maroon Custom Pearl
JDM OEM SiR Rear Decal
USDM Si DOHC V tec Side Decals
JDM OEM Thin Side Moldings
Spoon Sports Carbon Fiber Mirrors
Spoon Sports Carbon Fiber Duck Bill
GTP sports Carbon Hood
JDM OEM Stanley Corners
JDM OEM Tail lights
Mc Culligh HID 5000 K headlight H4 kit (white)
Mc Cullign HID 3000 K Fog light H3 Kit (yellow)
Wheel and Tire:
15x7 ET+ 38 Work Meister S1 (2pc) Custom Ordered Millano Red center - Ordered From work in Japan.
Toyo Proxes 205-50-15
ALEX want to send Special Thanks to:
Matt @ Status Auto Design
http://www.Statusautodesign.com
(310) 937-8382
Koko @ Super Tunning Exhaust
(818) 988-2335
James @ 16 18 22
Daniel @ Digital Horizon
http://www.digitalhorizon-online.com
Edmun @ Opak Racing
http://www.Opakracing.com
or Spoonsports.us
Jasper @ Options Autosalon
http://www.Optionsauto.com
Mark Vega
Jim & Alan @ Toda Racing @ WorkWheels
http://www.TodaRacing.com
Special thanks to Mark Vega, Kety Chu, JDM Kids, Matt Douglass, Lukaz, and Timmuh
Honda-Tech Member
Joined: Apr 2005
Posts: 600
Likes: 0
From: SUR 1T UP 1N L.A., SUP FOO
Re: ***anymore pics of this hatch*** (WishinItWas)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WishinItWas »</TD></TR><TR><TD CLASS="quote">
what lip is that and where the hell can i get it, ive seen it on password but not anymore if any one cares to help post up a link or PM thanks in advance</TD></TR></TABLE>if im not mistaking..thats the new SPOON LIP..there getting real crappy its half carbon/urethane..the price you pay for a real one its not worth it .your better off get a jdmshit one..i have a real lip and a vis one.im never putting a spoon one on..hows that for money well spent
what lip is that and where the hell can i get it, ive seen it on password but not anymore if any one cares to help post up a link or PM thanks in advance</TD></TR></TABLE>if im not mistaking..thats the new SPOON LIP..there getting real crappy its half carbon/urethane..the price you pay for a real one its not worth it .your better off get a jdmshit one..i have a real lip and a vis one.im never putting a spoon one on..hows that for money well spent
Honda-Tech Member
Joined: Sep 2003
Posts: 8,774
Likes: 0
From: Blitzburgh.
Re: ***anymore pics of this hatch*** (Jules Winnfield)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jules Winnfield »</TD></TR><TR><TD CLASS="quote">that's one clean *** EG </TD></TR></TABLE>
hell yeah
</TD></TR></TABLE>hell yeah
Trial User
Joined: Aug 2005
Posts: 2,777
Likes: 0
From: Tijuana Domestic Market
Re: ***anymore pics of this hatch*** (ALL_MOTOR_EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ALL_MOTOR_EG6 »</TD></TR><TR><TD CLASS="quote">alex has a nice car..i heard its getting a new motor???????????? 
</TD></TR></TABLE>
Already has.
Got new wheels too.
</TD></TR></TABLE>Already has.
Got new wheels too.
Trial User
Joined: Aug 2005
Posts: 2,777
Likes: 0
From: Tijuana Domestic Market
Re: ***anymore pics of this hatch*** (vtakvtrak)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtakvtrak »</TD></TR><TR><TD CLASS="quote">wheres the motor shots </TD></TR></TABLE>
Swap was finished the day before the shoot, we didn't have time to clean it up. It'll be all nice and pretty in time for the next shoot.
</TD></TR></TABLE>Swap was finished the day before the shoot, we didn't have time to clean it up. It'll be all nice and pretty in time for the next shoot.
