FS 1990 H22A Accord, very clean, many JDM parts
I'm going to be ready to sell my car in about a month from now.
Info: 1990 Honda Accord, 155k miles on body, 50k miles on motor.
Mods: JDM H22A motor (210hp), short ram intake, GReddy Cat-Back, cross drilled slotted Brembo rotors with hawk HPS pads, KYB struts, DZ springs, Ingalls camber kit, JDM 1 piece headlights and fog lights, JDM trunk lid and tail lights and JDM power folding mirrors, custom 2 tone leather interior and Acura RL wheels.
The Good: This is the cleanest CB7 Accord I have ever seen. The motor fits great and there are 0 driveability concerns.
The Bad: There is a vacuum leak, at idle the motor fluctuates from 900rpms to 1200. I cleaned the IAC and it helped it a little bit. Also there is no power steering. It needs only a pump because all the lines and resevior are still hooked up.
New Parts: NGK Plugs and wires, oil changes every 3000 miles with Castrol Syntec, new Brake Master Cylinder, new Clutch Master Cylinder and Slave Cylinder.
I have reciepts from the motor work, the motor + install totaled $4000.
here are some pictures





I'm asking for $5000 or BO
IM me on aim for more pics/info n8dogg666
or email at n8dogg666@yahoo.com
Info: 1990 Honda Accord, 155k miles on body, 50k miles on motor.
Mods: JDM H22A motor (210hp), short ram intake, GReddy Cat-Back, cross drilled slotted Brembo rotors with hawk HPS pads, KYB struts, DZ springs, Ingalls camber kit, JDM 1 piece headlights and fog lights, JDM trunk lid and tail lights and JDM power folding mirrors, custom 2 tone leather interior and Acura RL wheels.
The Good: This is the cleanest CB7 Accord I have ever seen. The motor fits great and there are 0 driveability concerns.
The Bad: There is a vacuum leak, at idle the motor fluctuates from 900rpms to 1200. I cleaned the IAC and it helped it a little bit. Also there is no power steering. It needs only a pump because all the lines and resevior are still hooked up.
New Parts: NGK Plugs and wires, oil changes every 3000 miles with Castrol Syntec, new Brake Master Cylinder, new Clutch Master Cylinder and Slave Cylinder.
I have reciepts from the motor work, the motor + install totaled $4000.
here are some pictures





I'm asking for $5000 or BO
IM me on aim for more pics/info n8dogg666
or email at n8dogg666@yahoo.com
Thread
Thread Starter
Forum
Replies
Last Post
92accordh22a
For Sale
2
Jan 29, 2007 08:10 PM




