EF Fluidyne, ITR Bilsteins, ITR Neuspeed Race springs, J&S Safeguard, and more...
Thread Starter
Honda-Tech Member
Joined: May 2001
Posts: 3,820
Likes: 1
From: Surrey, BC, Canada
EF Fluidyne, ITR Bilsteins, ITR Neuspeed Race springs, J&S Safeguard, and more...
Make some offers on this stuff.
SOLD I have a freshly overbored B16 Throttle body from a 99-00 Civic Si. Its been opened up to 64mm, and tapered to 66mm at the TB opening. The boring was done by Jorge at MaxBore (http://www.Maxbore.com). The MAP port on the top of the TB has been blocked off, but can be opened back up for the OEM MAP setup. The TB is otherwise completely intact and ready to run. SOLD
SOLD Bilstien yellow HP shocks with Neuspeed "Race" springs. Used but in really good condition. Pics later. Not blown or anything like that. Made for ITR. $250 plus shipping. SOLD
SOLD J&S Safeguard system. Version 1. Comes with wiring harness, Honda knock sensor, adapter bolt to screw it into the block/head for engines that are not tapped for knock sensor $175 plus shipping. SOLD
D16A6 rods/pistons in good used condition. I have 3 sets. $30 per set plus shipping.
Honda OEM exhaust manifold gasket. Brand new in the package. Not even opened. $10 plus shipping.
SOLD Fluidyne aluminum radiator for 88-91 Civic. In good condition. It took the brunt of an engine failure last summer when the wrist pin, bottom of piston and top of rod came out the front of the block, and punctured the rad. The holes (2 of them) were repaired, and it does not leak. It still looks bling when its freshly polished. $150 plus shipping. SOLD
Modified by Jaker at 10:41 AM 4/10/2006
Modified by Jaker at 9:13 AM 4/12/2006
Modified by Jaker at 10:02 AM 4/15/2006
Modified by Jaker at 8:58 PM 4/17/2006
Modified by Jaker at 8:59 PM 4/28/2006
SOLD I have a freshly overbored B16 Throttle body from a 99-00 Civic Si. Its been opened up to 64mm, and tapered to 66mm at the TB opening. The boring was done by Jorge at MaxBore (http://www.Maxbore.com). The MAP port on the top of the TB has been blocked off, but can be opened back up for the OEM MAP setup. The TB is otherwise completely intact and ready to run. SOLD
SOLD Bilstien yellow HP shocks with Neuspeed "Race" springs. Used but in really good condition. Pics later. Not blown or anything like that. Made for ITR. $250 plus shipping. SOLD
SOLD J&S Safeguard system. Version 1. Comes with wiring harness, Honda knock sensor, adapter bolt to screw it into the block/head for engines that are not tapped for knock sensor $175 plus shipping. SOLD
D16A6 rods/pistons in good used condition. I have 3 sets. $30 per set plus shipping.
Honda OEM exhaust manifold gasket. Brand new in the package. Not even opened. $10 plus shipping.
SOLD Fluidyne aluminum radiator for 88-91 Civic. In good condition. It took the brunt of an engine failure last summer when the wrist pin, bottom of piston and top of rod came out the front of the block, and punctured the rad. The holes (2 of them) were repaired, and it does not leak. It still looks bling when its freshly polished. $150 plus shipping. SOLD
Modified by Jaker at 10:41 AM 4/10/2006
Modified by Jaker at 9:13 AM 4/12/2006
Modified by Jaker at 10:02 AM 4/15/2006
Modified by Jaker at 8:58 PM 4/17/2006
Modified by Jaker at 8:59 PM 4/28/2006
Trending Topics
Junior Member
Joined: Jan 2003
Posts: 39
Likes: 0
From: San Diego, CA, USA
Re: EF Fluidyne, ITR Bilsteins, ITR Neuspeed Race springs, J&S Safeguard, and more... (Jaker)
Thread Starter
Honda-Tech Member
Joined: May 2001
Posts: 3,820
Likes: 1
From: Surrey, BC, Canada
Re: EF Fluidyne, ITR Bilsteins, ITR Neuspeed Race springs, J&S Safeguard, and more... (iamdoughnut)
John,
Pics sent to your email, and I've added them to the thread above.
Pics sent to your email, and I've added them to the thread above.
Thread
Thread Starter
Forum
Replies
Last Post
JroseEkb18c
For Sale
5
Feb 21, 2016 04:33 PM
Takumi Fujiwara
For Sale
46
Nov 3, 2006 09:44 AM
io_burn
Acura Integra Type-R
5
Dec 22, 2003 12:07 PM