This thread is NOT for cars for sale. This thread is strictly for parts.

YOU MUST START YOUR POST WITH FS: OR WTB:

What you can include in here:
Engines and all components
Trannies and associated drivetrain parts
Electrical items/ECUs
"All Motor" sized Slicks

What you can not include:
Suspension
Brakes
Wheels
Interior pieces such as seats etc
DO NOT reply to or quote posts, PM for questions.

Any violations of these basic rules, and the post will be deleted. and you MAY be docked user points/and or banned

http://www.hondamarketplace.com/zerothread/1845437

 

I have a brand new jg header with the factory collector and is ceramic coated, I also have the 3" race pipe for use at the track. The race pipe is used but the header is brand new.

Make offer$$$

I also have a zeitronix wideband with lcd display with all the sensors, egt,boost,wideband and seriel cable. This is the best wideband out there!

Make offer$$$

Been used for 3 track pulls with 92 octane gas

 

FS: GSR transmisson

open diff about 90k with no grinds

$550 obo


Modified by M!nes at 10:52 PM 8/5/2007

 

for sale is

a gsr head worked on by portflow with
supertech valve springs and retainers
supertech flat faced valves
buddy club spec 5 cams
bdl camgears in silver

head has less than 2 miles just used for 2 hours on the dyno
their is nothing wrong with the head its in perfect condition
MAKE AN OFFER AND PLEASE DONT LOW BALL ME

performer x manifold portmached to a gsr head by portflow
comes with 70mm tb was used witht he gsr head less than 2 miles on it
500 firm

PM ME IF INTERESTED WILL SHIP AT BUYERS EXPENSE

 

fs; 22" m and h racemasters mounted on gunmetal 13" lensos both brand new need gone asap $600 email bhughett@utk.edu located in middle TN

 

*B18C5 JDM 1.8L 4 cylinder 1998 Spec sleeved out to a 2.0L 11.8:1 Compression wisco pistons
*stock JDM ITR transmission with JDM LSD
* Spoon Sport Magnetic drain plugs
* King Motorsports Head Job, 3 Angle valve job, Hot Tank, Port and Polish
* Skunk2 Stage 3 cams
* Skunk2 valve train
* R/C 550cc injectors with resistor box
* Bored out Throttle body by King Motorsports
* Port Matched Intake Manifold by King Motorsports
* Hondata S200 ECU tuned by King Motorsports
* RMF header
* remote oil filter out
* Unorthodox Racing crank pulley
* Clutchmasters lightened Flywheel
* AEM fuel pressure riser
* Mugen Oil Pan
* Comptech Ice Box / Intake
* Exedy organic clutch
* Custom harness
There is 6 races on the motor. It is in great shape.

I am asking $7k plus shipping OBO.

Or I will trade for a bike. I would like a Honda preferably. I would consider a sport bike or a cruiser.

The motor is located in WI.

Shawn 608-576-1015
shawn@redheadracing.net

 

Skunk2 Stage 2 Cams - less then 3k miles - $350 obo

RC 310 injectors and Clips - less then 1k miles - $230

B18c Crank - 44k miles $90 obo

GSR Cams and gears - Off a 2000 b18c1, 88k miles - $75 obo


All Parts are in Orange County CA....

Trades are welcome,

All Parts are in Orange County CA....

Trades are welcome,

 

1) Eagle Crank - Brand New. 95mm Stroker crank with B Series Journals. This is still in the original packaging and only taken out to inspect and take pictures of. $500obo

2) Crower Rods - Used. For LS/B20. Inspected. All within factory limits. They are the 4340 Steel Billet Rods as seen here . I want $300obo

3) Moroso Oil Pan and Oil Pickup - Used. For all B series. This is the Aluminum one as seem here. 300obo

4) Skunk 2 Pro Series Cams - Used. Skunk 2 Pro Series 1+ Cams. These are a set from my old race motor. They were used for a season of racing and still are awesome cams. I upgraded to bigger cams. They Fit all B series VTEC motors. $500

5) Skunk 2 Cams - Used. Skunk 2 Stage 3 Cams. These are a set that I picked up to test on my race motor. I havent tested yet, but i've seen other's graphs and what they can do. I dont need to use these. They Fit all B series VTEC motors. $500

6) Skunk 2 Cam Gears - Used. Not Pro Series. These are the Annodized Blue Cam gears. They fit All B series and H23 motors. $140.

7) Ported ITR Head - Used. I'm selling my spare Race head. This head is from the owner of Velocity Trends down in Florida. It is hand ported and came off a motor that made 255whp. It comes with Skunk 2 Valves, Ferrea Valve Springs, and all internals and cam caps. $1200

8) Oil Pan - Used. Fits ITR and GSR Motors. Great condition. no dents. $75

9) ACL Race Rod Bearings - BRAND NEW. Part # 4B1946H-STD. These are brand new in the box. These are the uncoated version which help to get more accurate clearances.They are my spare set. Fits B16a, B18a/b and B20. $70obo

10) ACT Clutch - Used. Fits 90-91 B Series. Unsprung 6 puck clutch with Stock pressure Plate. $75

11)ACL Rod Bearings - BRAND NEW. Part # 4B1936-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $40obo

12) ACL Rod Bearings - BRAND NEW. Part # 4B1925-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits B16a, B18a/b and B20. $40obo

13) ACL Main Bearings - BRAND NEW. Part # 5M1937-STD. These are brand new in the box. I did not need them for the customer and have had them since. Fits H22 (small main) $50obo

14) ITR Pistons. - Used. I Have 2 standard bore JDM ITR Pistons (p73-00). They are in good condition. $20 per piston

15) B16 Piston - Used. I have a standard bore B16 Piston (p30). It is in good condition. $20

16) GSR Rods/Pistons - Used. I have a set of GSR Rods/Pistons. Rods are in awesome shape and so are 3 of the pistons. One piston is shot and needs to be replaced. USDM (P72-A0). $50

17) ITR Piston on GSR Rod - Used. I have a standard bore USDM ITR Piston (p73-a0) on a GSR Rod (p72). It is in good condition. $40

18) JDM ITR Rods/Pistons - Used. I have a set of JDM ITR Rods/Pistons. Rods are in good shape and so are the pistons. JDM (P73-00). I have 2 sets of these. $100per set. 1 SET SOLD

19) JDM ITR Rods - Used. I have 2 JDM ITR Rods/Pistons. The Pistons are broken, but the rods/bolts are still great. $20each

 

RC 440cc Injectors-Freshly cleaned and inspected by RC-$250
ATI Super Damper for B series motors-$100
AEM Universal fuel pressure regulator-$100
AEM Honda/Acura fuel pressure regulator-$100
Phantom Grip Super Light Rocker Arms (eliminate VTEC)-$300
JG Sheetmetal intake manifold for B16/ITR heads-(drag race)-$300
Crower 405A LS cams-$300
Hondata intake gaskets-One LS one B16-$25 each

 

<FONT SIZE="4"><FONT COLOR="blue"> WTB</FONT></FONT>
Need an intake manifold for a NA GSR. I don't want any sheet metal intake manifold or Victor X or any other forced induction manifolds.

Please PM me with what you got and a price or post here. I have some things to trade if ynecessary.

<FONT SIZE="4"><FONT COLOR="red"> FOR SALE</FONT></FONT>
NEW Endyn Wiseco Rollerwave pistons $315 shipped
The pistons are brand new with box with rings, pins and locks. I picked them up in another purchase. I believe the CR is with a B20 block and either B16 or B18C1 head. 84.5mm 12.8~13.1:1 CR




82mm USDM ITR pistons and pins, no rings. Brand new, installed but never used. $100 shipped


Eagle rods. All are in fine condition. Some surface rust because they are not bathing in oil.
Either set of Eagle rods, GSR or LS, $215 shipped.


NEW B18C headgasket $40.00 shipped


NEW B18B headgasket $40.00 shipped


NEW B18C timing belt $30.00 shipped




Modified by Smoothy at 3:23 PM 8/3/2007

 

about 7k of drive time

Cams in great shape.

selling dirt cheap to clean my storage out

You got Hondata, I'll even throw in a base map to help get you to the dyno!!!!!!

PM for price and you won't be disappointed

 

AP1 S2k Throttle body (same size as ITR 62mm) $175obo

OBD2 B18B1 Dizzy - (missing plugs) $30
OBD1 B18B1 Dizzy - $40
OBD2 B18B1 Intake Manifold - $40
MSD RPM switch - $20
1999 GSR gearsets;shifter mechanism; reverse gear and selectors; Upper Mainshaft bearing; Mint dog teeth & Shift forks; No 3-4 synchro and 3-4 Slider. $125obo



SL4 RC 370's $150obo

 

WTB: B20 short block ASAP

 

2000 usdm itr cams pm for pics
250.00 +shipping
will trade for rc 440cc injectors for 92 to 95 civic

 

FS:

Bare B16a2 Block with mains/Crank...$150.00shipped
DSM 450cc Injectors w/clips and resistors...$110.00shipped
Brand New b18B Timing Belt...$35.00shipped
New ARP B18B Head Studs...$90.00shipped
Walbro 255 Fuel Pump...$80.00shipped
Bare B16a2 Intake Manifold w/Throttle body...$30.00shipped
Comp Clutch Sprung 6puck w/2k & Pressure plate...$200.00shipped
ACT Street 12lb Flywheel w/2k...$200.00shipped

WTB:

JE pistons Must be Standard bore 81mm *NEW OR USED*
Cable B-series Tranny *MUST BE MINT*
B-series into EF Mounts *NEW OR USED*
Cable B-series Shift Linkage
OBD0 Alternator
OBD0 Starter



Modified by VRD^sam at 3:28 AM 8/8/2007

 

wtb:k20 bare block and head

 

WTB: H22 Blox B cams ASAP

 

WTB - cable GSR trans or cable lsd b16 trans

 

p73 type R pistons for sale

Brand Spanking new in the box with pins.

.25 oversized

$150

trades welcome

So CAL

 

need twm itbs for h22

 

FS: h23a crank with caps best offer.

 

WTB

I want to buy Individual throttle bodies Off a AE111, 4age engine. PM me with what you got.

Thanks

 

FS/FT: AN-R b-series header

https://honda-tech.com/zerothread?id=2065592

 

Fs Lsvtec swap
B16 head, b18b block, gsr trans
https://honda-tech.com/zerothread?id=1913892

 

WTB:Weld Magnum (4x100) 13x8 rims w/ or w/o tires.