hey.. i got a 95 acura integra LS.. i was going to take out my struts to put in my coilover and guess that 14mm bolt that goes into the rear strut thru the fork and into lower control snap.. the head of the 14mm bolt snapped in half.. leaving the other half of the bolt where the welded nut is..


i'm assuming its number 19 for the bolt.. but i need the washer too? so what number is that

 

gotta reverse drill that bolt then......i can explain how to do it..but it'll take too long and i gotta get to class.....im sure there are guys here that have a DIY on reverse drilling.

 

i ordered

#24 for the bushing

http://acuraautomotiveparts.or...9.gif

and for the bolt #19

http://estore.honda.com/epc/im...B.png


please tell me im right since i ordered it.. thanks

 

OMG, this is the 3rd post I've seen for this damn bolt today!!!!!!!!!!!

 

well its honda design that sucks.. anyways number 19 and 24 was the right one i ordered right?

 

is this right? anybody... somebody

 

Yes you ordered the right parts. If you cut the lower part of the shock off you may not have to change the bushing

 

thanks should arrive on friday..

looking foward to installing it..

 

i had the same problem, took 2 days to get a a pair of lowering springs on my car...it was beat....