All you H22 guys...wanna sell your F22?
I'll have a F22b available near the end of the month. That's when I'm doing my swap. It will be out of a '94 Accord EX. An engine like this will would probably cost peanuts at this point but make an offer. Or email me at Toys7505@attbi.com and I'll answer any ?'s you have. ok?
5 bucks and six pack?
****, I'm hoping to get $300 for my F22A6 and 5-speed tranny.
F22A6: '92-'93 Accord EX
water cooled, 4-stroke SOHC (non VTEC), gasoline engine
4-cylinder in line, transverse
4 valves per cylinder
bore and stroke: 85.0 mm x 95.0 mm
displacement: 2,156 cc
compression ratio: 8.8:1
140 HP @ 5600 RPM
142 lb-ft @ 4500 RPM
H2U4 5-speed transmission
1st: 3.307
2nd: 1.809
3rd: 1.223
4th: 0.903
5th: 0.705
FD: 4.062
****, I'm hoping to get $300 for my F22A6 and 5-speed tranny.
F22A6: '92-'93 Accord EX
water cooled, 4-stroke SOHC (non VTEC), gasoline engine
4-cylinder in line, transverse
4 valves per cylinder
bore and stroke: 85.0 mm x 95.0 mm
displacement: 2,156 cc
compression ratio: 8.8:1
140 HP @ 5600 RPM
142 lb-ft @ 4500 RPM
H2U4 5-speed transmission
1st: 3.307
2nd: 1.809
3rd: 1.223
4th: 0.903
5th: 0.705
FD: 4.062
Trending Topics
5 bucks and six pack?
****, I'm hoping to get $300 for my F22A6 and 5-speed tranny.
****, I'm hoping to get $300 for my F22A6 and 5-speed tranny.
5 bucks and six pack?
****, I'm hoping to get $300 for my F22A6 and 5-speed tranny.
F22A6: '92-'93 Accord EX
water cooled, 4-stroke SOHC (non VTEC), gasoline engine
4-cylinder in line, transverse
4 valves per cylinder
bore and stroke: 85.0 mm x 95.0 mm
displacement: 2,156 cc
compression ratio: 8.8:1
140 HP @ 5600 RPM
142 lb-ft @ 4500 RPM
H2U4 5-speed transmission
1st: 3.307
2nd: 1.809
3rd: 1.223
4th: 0.903
5th: 0.705
FD: 4.062
****, I'm hoping to get $300 for my F22A6 and 5-speed tranny.
F22A6: '92-'93 Accord EX
water cooled, 4-stroke SOHC (non VTEC), gasoline engine
4-cylinder in line, transverse
4 valves per cylinder
bore and stroke: 85.0 mm x 95.0 mm
displacement: 2,156 cc
compression ratio: 8.8:1
140 HP @ 5600 RPM
142 lb-ft @ 4500 RPM
H2U4 5-speed transmission
1st: 3.307
2nd: 1.809
3rd: 1.223
4th: 0.903
5th: 0.705
FD: 4.062
*PS: ECU included?
Yup. ECU included. The motor will be here dude. Just let me know.
) ill pick up on the way down to VA..btw, how many miles and what condition?
It's the shipping part that's the hard part, also costs alot, anyone want to sell an f22 in the chicago area???
you will find one.
The F22A6 has one hell of a rod knock due to a spun bearing on #2 cylinder Replaced rods bearings 3 times before getting smart and buying h22a swap.
the tranny does not go with it i still want to check to see what the gear ratios are compared to the jdm h22a tranny I may go thourgh it and put a limited slip and put it back in the car if i like what i find maybe i will change the final drive also if 4DoorH22 has these specs it woiuld be greatly appreciated and may have another tranny for sale or i may just keep it as a spare can never hhave to many honda tranny's laying around cause i am forever breaking them
the tranny does not go with it i still want to check to see what the gear ratios are compared to the jdm h22a tranny I may go thourgh it and put a limited slip and put it back in the car if i like what i find maybe i will change the final drive also if 4DoorH22 has these specs it woiuld be greatly appreciated and may have another tranny for sale or i may just keep it as a spare can never hhave to many honda tranny's laying around cause i am forever breaking them
I just pulled an F22B2 out that runs great. I also have a complete upper end off of a 1998 Accord EX that I will sell with it. The engine has 110k on it and the head has 22k on it.
Make me an offer on both.
Make me an offer on both.
i have an f22a4 the motor only has 60,000 on it. it is out of a 90 accord ex.
if you have any questions email me at jakead211@aol.com
if you have any questions email me at jakead211@aol.com
Thread
Thread Starter
Forum
Replies
Last Post




