This is a repost because no one in the 92-00 forum is responding...

I have a jdm b16 sir 2. The stock plugs are NGK BKR6E-N11 which are gapped to .054. I bought the NGK vpower which were supposed to be pre-gapped and werent. I searched on here and found the gap for a b16 should be between .038 and .044 or something close to that. The question is which gap should I go with the .038 to .044 or the .054??

 

Nvm. I found a b16 manual online. It says to gap 1 to 1.1 which is that .038 to .044. I guess the old plugs were gaped higher for some reason. If this is wrong let me know.

 

don't count on plugs to be pre gapped always check them yourself ...good luck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoonracer84eg &raquo;</TD></TR><TR><TD CLASS="quote">... I guess the old plugs were gaped higher for some reason. If this is wrong let me know. </TD></TR></TABLE>Or maybe the old plugs had gotten wider by erosion.