Custom H22 VTEC Head / H22 Golden Eagle Block
Thread Starter
Junior Member
Joined: Oct 2003
Posts: 257
Likes: 0
From: Houston, tx, usa
Custom H22 VTEC Head / H22 Golden Eagle Block
Complete bottom end MINUS pistons and rods. Everything Else.
From an '01 Prelude. Will drop in '92 and up preludes. Golden eagle Sleeved. Bored for 88.5mm Pistons.
Everything from the Aluminum Pan, to the Squirters with bolts. From Rear main seal to Oil pump assembly and timing belt pulley. I have yet to put it together.
$600 obo.
THe head is Port matched on intake side. This is a complete head. It has NOT been installed on a motor since I've had the Stainless valves (Brand New) and 3 angle valve job done. It has also been decked. I'll even throw in ARP head studs. ($100 new)
$400.00
For multiple pictures and questions. Please E-mail me at bruce_karger@yahoo.com or call (713) 584-5709
Modified by 95ONE at 12:53 AM 3/22/2006
From an '01 Prelude. Will drop in '92 and up preludes. Golden eagle Sleeved. Bored for 88.5mm Pistons.
Everything from the Aluminum Pan, to the Squirters with bolts. From Rear main seal to Oil pump assembly and timing belt pulley. I have yet to put it together.
$600 obo.
THe head is Port matched on intake side. This is a complete head. It has NOT been installed on a motor since I've had the Stainless valves (Brand New) and 3 angle valve job done. It has also been decked. I'll even throw in ARP head studs. ($100 new)
$400.00
For multiple pictures and questions. Please E-mail me at bruce_karger@yahoo.com or call (713) 584-5709
Modified by 95ONE at 12:53 AM 3/22/2006
Thread
Thread Starter
Forum
Replies
Last Post