Where can i get separate sleeves for an H22, 87mm STD bore, the only thing i can find is sleeveing companies, i have a machine shop that will do the machining for me. Not sure i want dartons or anything like that, just iron sleeves, i am just getting rid of the FRM problem, Thanks

 

contact PrecisionH23a

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H22Luda720 &raquo;</TD></TR><TR><TD CLASS="quote">Where can i get separate sleeves for an H22, 87mm STD bore, the only thing i can find is sleeveing companies, i have a machine shop that will do the machining for me. Not sure i want dartons or anything like that, just iron sleeves, i am just getting rid of the FRM problem, Thanks </TD></TR></TABLE>

Try Darton Replacement sleeves. THey're fairly cheap and will get rid of your FRM problem. I don't recommend them for very high hp applications though.

 

I checked into Darton, not the replacment sleeves but The Flanged sleeves look ok for 15-20psi? any suggestions/experiences?

 

i was told that the flanged sleeves hold up to 30 psi(i wouldn't go past 20) and the MID sleeves hold up to 60 psi

 

I have them installed but the engine is not running yet. Assembly in progress...