so i am planning on purchasing a set of wheels sized 15x6.5 with a +32 offset, i dont want any fender gap at all, will i rub?

they will be going on my hatchback with 195/50r15 tires.

any tips, comments, experience or suggestions are welcomed

 

im not sure but they might sit in too far or rub on the inside there is suppose to be an offset of +40 i believe

 

other way around.

you're on the bubble but they will probably fit with a little work. you're going to need a good bit of camber to keep them out of the fenders, and i'd imagine that you'll need to get the louisville slugger out for the fender lips.

 

up

 

feel free to chime in

 

 

They should rub. I've had 38mm offset rims rub on my car before. I doubt you'd be able to get a 35mm to tuck even with a bunch of customizing.

 

well, im gonna chance it, as the rims i bought are sick.

15x7 +38 sticks out the same as 15x6.5 +32

a wheel shop in my area can change the offset of the wheels for me, if its bad, and i have full coilovers, ill just make them really hard.

car will be ready in a month or so, we'll see what happens.