For Sale---ALANIZ B series Competition Head (package)---
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,015
Likes: 2
From: houston, tx, usa
For Sale---ALANIZ B series Competition Head (package)---
Up for grabs is a BULLETPROOF head with a SOLID valvetrain. The headwork was purchased from and performed by Joe Alaniz himself at http://www.alaniztechnologies.com. I have invested over $2200 in this head alone last May. Due to lack of TIME and PATIENCE to finish what I have started, I must sell.
The buyer WILL recieve FULL paperwork/reciepts/documentation of all work performed on this incredibly built cylinder head.
1999 Acura Integra GSR Cylinder Head:
-Alaniz Competition Port and Polish (Polish, Deshroud, and Debur all chambers)
-Alaniz Competition Valve Job
-Resurfaced and hand lapped (up to .030 matierial has been removed)
-Complete removal of valvetrain/inspection and studs--lap all surfaces
-Supertech Titanium Nitrade oversized valves, dual springs, and retainers (valve seals obviously included)
This head was originally going to be used on a low boost setup, but plans have changed. Rest assured you will be recieving a SOLID piece of craftsmanship.
Erick Aguilar has run 10.59 @ 127mph using this head setup.
Price: <FONT COLOR="red">$1700 obo</FONT> (NEW completely assembled head, no cams)
Please contact me, Rene @ 832-335-7265 to schedule a pickup/look or to ask questions
This head has been flowbench tested at Faerman's and results were AWESOME!
The buyer WILL recieve FULL paperwork/reciepts/documentation of all work performed on this incredibly built cylinder head.
1999 Acura Integra GSR Cylinder Head:
-Alaniz Competition Port and Polish (Polish, Deshroud, and Debur all chambers)
-Alaniz Competition Valve Job
-Resurfaced and hand lapped (up to .030 matierial has been removed)
-Complete removal of valvetrain/inspection and studs--lap all surfaces
-Supertech Titanium Nitrade oversized valves, dual springs, and retainers (valve seals obviously included)
This head was originally going to be used on a low boost setup, but plans have changed. Rest assured you will be recieving a SOLID piece of craftsmanship.
Erick Aguilar has run 10.59 @ 127mph using this head setup.
Price: <FONT COLOR="red">$1700 obo</FONT> (NEW completely assembled head, no cams)
Please contact me, Rene @ 832-335-7265 to schedule a pickup/look or to ask questions
This head has been flowbench tested at Faerman's and results were AWESOME!
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,015
Likes: 2
From: houston, tx, usa
Re: (undagroundrican)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by undagroundrican »</TD></TR><TR><TD CLASS="quote">damn bump for good head almost as nice as my gurls head game lol good luck witht the sale !!!! </TD></TR></TABLE>
lol, this is some GOOOOD head----
somebody buy?! why dont i have a buyer yet?!!
lol, this is some GOOOOD head----
somebody buy?! why dont i have a buyer yet?!!
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,015
Likes: 2
From: houston, tx, usa
i suppose the most secure way to do this would be a paypal transaction via "credit card" so both YOU and I are covered...
i will accept $1500, please email me at spoonfedhatch@sbcglobal.net or just call me to setup a transaction
i will accept $1500, please email me at spoonfedhatch@sbcglobal.net or just call me to setup a transaction
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,015
Likes: 2
From: houston, tx, usa
Thread
Thread Starter
Forum
Replies
Last Post
SpoonFedHatch
Texas -OK -LA (Sales)
6
Nov 27, 2006 05:05 PM
SpoonFedHatch
Classifieds: Forced Induction
3
Jun 7, 2006 11:31 PM
