im lookin for a sleeper lookin exhaust/muffler, and i kno a lot of folks told me to get a ES oval or a magnaflow, but im lookin for a exhaust/muffler that is actually shaped like the stock canister (or as big) and the tip goes out as far as the stock tip. i wanted to get a Greddy SP, but the new one (the Greddy SP2) has a HUGE tip on it. anyone knows one or has suggestions?

heres an idea on what im talkin about: http://www.we-todd-did-racing....x.jpg

 

The OBX twin loop of eBay is nice from what i've heard and it is pretty hard to notice.

 

rsr mag?

 

Apexi worldsport Noir.



http://apexi-usa.com/product_e...Num=1

Vibrant muffler



https://honda-tech.com/zerothread?id=1414740

 

I went with a kteller $90 2 1/4" magnaflow muffler and its so awesome, I love it! It sounds so quiet and low while just cruising but sounds real nice while on the throttle. I had my muffler man move it up a little bit under the car and run a 2 1/4" pipe to the back bumper so it looks completely stock. People ask me all the time why I haven't upgraded my exhaust.

http://www.kteller.com/store/p...d/626

 

you can try the jdmcarboy replica mugen muffler....but if i were you i'd go pick it up....dont order it...this guys flakes out...

 

that vibrant one looks pretty coo, where can i buy one (2.25)? that Noir APexi one looks tyte too but the tip is hella huge.

anyone got a pics of one on a EG hatch?

 

I had this dilema...RSR ExMag is the way to go...super quiet. If you ever decide the tip is too big, change it. It will look stock after that. I was debating doing that...I think its fine though. Not flashy at all.

The one on the left is a RSR ExMag and the one on the right if you can see is an OEM Type R muffler.

 

Kteller exhaust with Magnaflow resonator and muffler with chrome stock looking tip welded on.

 

Bought the car w/ it on and it's only loud when you get on it looks damn near stock

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dwnthehatch &raquo;</TD></TR><TR><TD CLASS="quote">Apexi worldsport Noir.

</TD></TR></TABLE>

This exhaust won't actually be available for purchase till' sometime next month. I've been trying to find it everywhere... Two different suppliers told me this same thing.

 

i have the rs*r ex-mag. shape just like stock but with a rsx tip look.

apexi ws noir.

 

what size is the outlet of the WS and the Exmag? (not the tip size)

 

RSR

 

go custom. Mines 3 inch mendrel bent muffler is up inside the bumper with a turn down pipe. Not muffler or pipe to be seen andwith my dented tailgate people don't even think I can outrun there cobra r

 

yeah im thinking of gettin the vibrant muffler (2.25) and modify it by puttin a rsx tip on it or something similar to make it look like a stock exhaust

 

mugen twin loop if you have the money

 

any shops carry the vibrant muffler?

[EDIT]
or carry the original Greddy SP (SP1) muffler/exhaust system for a 95 EG hatchy?


Modified by Red Balut at 11:48 PM 3/13/2006


Modified by Red Balut at 11:49 PM 3/13/2006

 

I don't think twin loops look stock

 

Mines a polished stock '99 hatch rear section

 

What I would do is get 2.25 in. straight piping from end of headers back and use the exhaust.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Red Balut &raquo;</TD></TR><TR><TD CLASS="quote">any shops carry the vibrant muffler?

[EDIT]
or carry the original Greddy SP (SP1) muffler/exhaust system for a 95 EG hatchy?


Modified by Red Balut at 11:48 PM 3/13/2006


Modified by Red Balut at 11:49 PM 3/13/2006</TD></TR></TABLE>

https://honda-tech.com/zerothread?id=1414740

 

haha i completely forgot about the spoon street muffler. i think it looks kinda stocky

 

apexi WS (not even noir) looks clean and pretty normal imo

or you can always do something like a borla/TT and tuck it under the car and have a little pipe out :-D

 

kteller 3inch