i tried searching but didnt come up with anything, i know people have done it but does anyone have a link or anything to help me with puttin a 92 teg dash in my 88 hatch

 

Try searching integra dash in the archived CRX/CIVIC forum I just got 28 results

 

i've got a 96+ integ dash in my crx. its not the easest things to do by far but is possible with time. lmk if you need any help on it or wanna see pics

 

I wouldn't mind seeing pics.

I can get a dash pretty cheap. don't like the EF one.


How hard was it, how much custom fabbing. can it be done in a weekend or two?

 

i'll post em up when i get home from school.

dashes are hard to come by without being damaged in some way. if you could get one cheap then go for it.

it was hard the first time. just take your time when your doing it. it can be done in a weekend if you have a welder, 1/16 mild steel, and a grinder

 

cool,

my friend welds, but he's hard to get a hold of sometimes.

I'll still try it since I can get that dash.

 

I just have a quick question, what do you need the welder and the grinder for, I,ve done three teg dashes into ef's and i have a few friends with the same conversion, and we never put the grinder to anything Im not trying to say your doing it wrong, I'd just like to know how someone else has done it.

 

unless you plan on trying to find out some way to use the a/c vents you need to cut them out since they dont clear the firewall. the grinder is used to cut off the triangle vents found inside the dash. the welder is used to make the triangle brackets i used to stabilize the dash.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 1crazysir &raquo;</TD></TR><TR><TD CLASS="quote"> I just have a quick question, what do you need the welder and the grinder for, I,ve done three teg dashes into ef's and i have a few friends with the same conversion, and we never put the grinder to anything Im not trying to say your doing it wrong, I'd just like to know how someone else has done it.</TD></TR></TABLE>

no worries, everyone has there own way of doing things, i just found it easer for me to do it this way

 

Ive done it already....

https://honda-tech.com/zerothread?id=746928

 

All my pics are down though .lol ill have to get new ones up, just ripped it out again redoing wires so ill show it off again later