sw388's, itr master cylinders, dsm 450's, rear itr seats and much more
Thread Starter
Joined: Jan 2002
Posts: 1,803
Likes: 0
From: miami, fl, USA
sw388's, itr master cylinders, dsm 450's, rear itr seats and much more
pics available at - http://www.hermsfab.com/pics.htm
usdm itr rear seats, perfect conditions - $250 obo
unchipped, untouched p06 ecu - $75 shipped
tial 35/38mm block off plate - 15 shipped obo
gm 3bar map sensor pigtail - 20 shipped obo
nokia usb datalogging cable - 25 shipped obo
2.25" t-bolt clamps - 2.75 each shipped
2.5" t-bolt clamps - 3 each shipped
1 foot of 2" napa hose good for about 4 turbo couplers - $22 shipped
turbo rx-7 intank fuel pump, used for less than a day - $80 shipped obo
b18a intake manifold with fuel rail, tb and injectors, missing a few sensors $80 shipped
b16 bare intake manifold $50 shipped
b18a intake manifold(w/o sensors) - 50 shipped
b18a fuel rail - $20 shipped
obd1 ecu plugs with about 5 inches of wire $22 shipped
resistor box $20 shipped
dsm 450 blue tops - $65 shipped
obd1 to obd1 harness, great for tuners and such - 45 shipped
jdm rhd itr brake master cylinder and booster - 220 shipped
jdm rhd itr clutch master cylinder - 75 shipped
jdm rhd itr abd unit - 175 shipped
abs fuse box - 30 shipped
manual pedals off rhd itr - 75 shipped
some sort of blueish integra right side seat - 30
integra trunk/gas door popping handle things - 20 shipped
16" spoon sw388's(testing waters) flat black, one has a bit of of a scratch(curb maybe) from previous owner, other than that, theyre fine - make offers.
pics available at - http://www.hermsfab.com/pics.htm
email: herman@hermsfab.com
aim: speedisntkillnme
usdm itr rear seats, perfect conditions - $250 obo
unchipped, untouched p06 ecu - $75 shipped
tial 35/38mm block off plate - 15 shipped obo
gm 3bar map sensor pigtail - 20 shipped obo
nokia usb datalogging cable - 25 shipped obo
2.25" t-bolt clamps - 2.75 each shipped
2.5" t-bolt clamps - 3 each shipped
1 foot of 2" napa hose good for about 4 turbo couplers - $22 shipped
turbo rx-7 intank fuel pump, used for less than a day - $80 shipped obo
b18a intake manifold with fuel rail, tb and injectors, missing a few sensors $80 shipped
b16 bare intake manifold $50 shipped
b18a intake manifold(w/o sensors) - 50 shipped
b18a fuel rail - $20 shipped
obd1 ecu plugs with about 5 inches of wire $22 shipped
resistor box $20 shipped
dsm 450 blue tops - $65 shipped
obd1 to obd1 harness, great for tuners and such - 45 shipped
jdm rhd itr brake master cylinder and booster - 220 shipped
jdm rhd itr clutch master cylinder - 75 shipped
jdm rhd itr abd unit - 175 shipped
abs fuse box - 30 shipped
manual pedals off rhd itr - 75 shipped
some sort of blueish integra right side seat - 30
integra trunk/gas door popping handle things - 20 shipped
16" spoon sw388's(testing waters) flat black, one has a bit of of a scratch(curb maybe) from previous owner, other than that, theyre fine - make offers.
pics available at - http://www.hermsfab.com/pics.htm
email: herman@hermsfab.com
aim: speedisntkillnme
Trending Topics
B*a*n*n*e*d
iTrader: (1)
Joined: Mar 2004
Posts: 17,750
Likes: 0
From: new jersey home of wanna be's posers claimers ricers biters and where everyone fakes the funk
Re: sw388's, itr master cylinders, dsm 450's, rear itr seats and much more (VTECNLUDE)
do u have the itr MC.. brake or clutch? is it 98 and up?
Thread Starter
Joined: Jan 2002
Posts: 1,803
Likes: 0
From: miami, fl, USA
Re: sw388's, itr master cylinders, dsm 450's, rear itr seats and much more (VTECNLUDE)
still have the stuff, and some additional items:
msd external coil - 35 shipped
b18a cams - make offer
b18b cams - make offer
b16a cams - make offer
ls oil pan - 50 plus shipping
ls crank in mint conditions - 100, no shipping
golden eagle sleeved block, its 85mm now, one cylinder has some chips in it, could be bored to 85.5 or 86mm, for all motor applications - make offer
msd external coil - 35 shipped
b18a cams - make offer
b18b cams - make offer
b16a cams - make offer
ls oil pan - 50 plus shipping
ls crank in mint conditions - 100, no shipping
golden eagle sleeved block, its 85mm now, one cylinder has some chips in it, could be bored to 85.5 or 86mm, for all motor applications - make offer
