Turbo, Motors, Harnesses, RPF1's, Toyo, ECU's, etc
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Turbo, Motors, Harnesses, RPF1's, Toyo, ECU's, etc
I'm giving up on a lot of projects I have going and need to focus on paying off a shitload of debt I have accumulated. I will try to list prices on most stuff, but if its not there then just shoot me an offer. Thanks for looking.
If you are local, then you can PM me, Email me at bbudd94gsr@hotmail.com, Call me @ 214-766-2517, text me, send me flowers, I don't care as long as it sells
Brandon
Enkei RPF1's -- 15x7 w/ 41mm offset. These wheels are IMMACULATE except for one tiny scratch where a tire shop put a damn clip weight on the outside. Maybe a total of 700 miles max on these wheels and tires, mostly highway just to work and back. Tires are Toyo T1-S in 215-45-15 (Discontinued tires and hard as fawk size to find). Throw me an offer, but I am extremely hesitant to sell these so lowballing will be rejected. Sorry for the dirty pic
Turbo Setup -- Apexi Intercooler, Intercooler piping flanged for HKS SS bov, Turbonetics Wastegate, -10an return line, -4an feed line, oil pressure sensor, 2 sets of fittings for the back of the block (one turbonetics and one generic, Precision 880cc injectors, tapped LS oil pan with Earl's -10an fitting, Moroso/Endyne crank case breather, and not pictured but included is an obd1 LS wiring harness with resistor box wired in and a Turbonetics manual boost controller.
b16a3 block -- Has everything except for pistons, rods, and oil pump. $150 obo
95 Accord EX Intermediate shaft and both axles $100
H22 factory valvetrain -- Valves, Valve springs, retainers. Still in my motor, but I will be removing soon -- Make Offer
H22 factory Intake Mani -- Has injectors, B&M fuel pressure reg, fuel rail, throttle body, EGR blockoff, etc. -- Make offer
ACT Clutch H22 -- Xtreme Pressure plate, Performance Organic disc, Clutchmasters 8 lb flywheel. Buy this setup and I'll throw in the Centerforce clutch below it in the pic for free. - $500
ATR crank pulley for H22. Factory balanced lightweight crank pulley from the Accord Type R. Only runs alternator belt. - $100
OBD2 Complete Integra LS wiring harness - $100
LS Ecu -- Ran on my buddy's obd1 LS and B20. Chipped by XS - $125
Anodized Blue spark plug cover -- $30
2 GSR brake boosters and 1 with 1" master cylinder. - $50 for the brake booster and $100 for booster and master together. $130 for all three
Modified by JDMH22HATCH at 12:02 AM 3/2/2006
Modified by JDMH22HATCH at 9:43 PM 3/15/2006
Modified by JDMH22HATCH at 2:41 PM 4/26/2006
If you are local, then you can PM me, Email me at bbudd94gsr@hotmail.com, Call me @ 214-766-2517, text me, send me flowers, I don't care as long as it sells
Brandon
Enkei RPF1's -- 15x7 w/ 41mm offset. These wheels are IMMACULATE except for one tiny scratch where a tire shop put a damn clip weight on the outside. Maybe a total of 700 miles max on these wheels and tires, mostly highway just to work and back. Tires are Toyo T1-S in 215-45-15 (Discontinued tires and hard as fawk size to find). Throw me an offer, but I am extremely hesitant to sell these so lowballing will be rejected. Sorry for the dirty pic
Turbo Setup -- Apexi Intercooler, Intercooler piping flanged for HKS SS bov, Turbonetics Wastegate, -10an return line, -4an feed line, oil pressure sensor, 2 sets of fittings for the back of the block (one turbonetics and one generic, Precision 880cc injectors, tapped LS oil pan with Earl's -10an fitting, Moroso/Endyne crank case breather, and not pictured but included is an obd1 LS wiring harness with resistor box wired in and a Turbonetics manual boost controller.
b16a3 block -- Has everything except for pistons, rods, and oil pump. $150 obo
95 Accord EX Intermediate shaft and both axles $100
H22 factory valvetrain -- Valves, Valve springs, retainers. Still in my motor, but I will be removing soon -- Make Offer
H22 factory Intake Mani -- Has injectors, B&M fuel pressure reg, fuel rail, throttle body, EGR blockoff, etc. -- Make offer
ACT Clutch H22 -- Xtreme Pressure plate, Performance Organic disc, Clutchmasters 8 lb flywheel. Buy this setup and I'll throw in the Centerforce clutch below it in the pic for free. - $500
ATR crank pulley for H22. Factory balanced lightweight crank pulley from the Accord Type R. Only runs alternator belt. - $100
OBD2 Complete Integra LS wiring harness - $100
LS Ecu -- Ran on my buddy's obd1 LS and B20. Chipped by XS - $125
Anodized Blue spark plug cover -- $30
2 GSR brake boosters and 1 with 1" master cylinder. - $50 for the brake booster and $100 for booster and master together. $130 for all three
Modified by JDMH22HATCH at 12:02 AM 3/2/2006
Modified by JDMH22HATCH at 9:43 PM 3/15/2006
Modified by JDMH22HATCH at 2:41 PM 4/26/2006
free bump^ for a friend.
Honda-Tech Member
Joined: Jan 2005
Posts: 370
Likes: 0
From: Dallas, TX
Re: (IIIM slow)
what do you want for the b18b stuff listed, don't tell me to give you an offer cause I will lowball you. I just want to know lowest I have cash in hand.... Or I have trades.... Oh yeah and the IM shaft and axles from the sohc ex accord what you want for those???
Modified by db1b18c at 10:25 AM 3/3/2006
Modified by db1b18c at 10:25 AM 3/3/2006
Trending Topics
Thread Starter
Joined: Sep 2002
Posts: 7,603
Likes: 2
From: Los Angeles, CA
Re: (Taco Sauce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Taco Sauce »</TD></TR><TR><TD CLASS="quote">Would you be interested in shipping the b16 block?
-thomas</TD></TR></TABLE>
Where too? If you're in Texas I can meet you somewhere. Last time I shipped a block it was almost $130. Prolly not worth it for just a block
-thomas</TD></TR></TABLE>
Where too? If you're in Texas I can meet you somewhere. Last time I shipped a block it was almost $130. Prolly not worth it for just a block
Member
Joined: Oct 2001
Posts: 1,466
Likes: 0
From: The Taint of Mexico
Re: (JDMH22HATCH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMH22HATCH »</TD></TR><TR><TD CLASS="quote">
Where too? If you're in Texas I can meet you somewhere. Last time I shipped a block it was almost $130. Prolly not worth it for just a block</TD></TR></TABLE>
I'm located in Houston. I think the shipping should be around $50.00 or so through UPS, of course I'd be more then happy to pay it. Thanks for replying back..
-thomas
Where too? If you're in Texas I can meet you somewhere. Last time I shipped a block it was almost $130. Prolly not worth it for just a block</TD></TR></TABLE>
I'm located in Houston. I think the shipping should be around $50.00 or so through UPS, of course I'd be more then happy to pay it. Thanks for replying back..
-thomas
Junior Member
Joined: Nov 2004
Posts: 500
Likes: 0
From: Go fock YourSelf, lane, come and see me
Re: Turbo, Motors, Harnesses, RPF1's, Toyo, ECU's, etc (Pedal to the Metal)
what the hell are you gonna do with those parts nick, those are for b series you single cam freeeeek
free bump
free bump