This is a complete bmx bike i pieced together. i have hardly any time to ride anymore so i'm selling it. It's in perfect working condition. However it is sold as is. there are scratches, chips, etc in the components from normal everyday riding. the parts list is listed in detail below. if you bought seperately, all the seperate pieces together would cost you at least $1300.

MacNeil Frame (Deuce Deuce) Flat gray Color 22" top tube length. US bottom Bracket. great for riders over 6ft tall. i don't think you can get this frame anymore, i have not seen it at albes or Dan's. was $330 new. it is the same thing as the Team frame, but macneil stretched the top tube to 22". used for about 6 months of riding. twice a week at the most.

Primo Lower Headset Fork Cup

Odyssey Dirt Forks. black.

Profile 175mm chromoly arms, US bottom bracket, titanium spindle. hold up alot better then euro cranks. no stripping, etc. super light weight with the titanium spindle. Profile Hop Up Kit. Albes limited edition Odyssey Jim Cielencki pedals in special green/yellow color. RNC titanium 25T sprocket with bash guard. this setup would run you close to $300 or more. perfect setup. spins like crazy. easily do double crank flips. Cranks are about 2 years old. sprocket, chain, spindle were used about 6 months.

Primo Rear Cassette wheel 14mm axles. [black spokes, chrome rim(better stopping power) ]. Profile 9 tooth titanium driver. KMC street chain. 25-9 gearing. super light. shorter chain length. still normal gear ratio. Primo cassette wheel runs close to $200. the Profile Titanium driver is about $80. setup used for about 1 year

SUN BARELY LEGAL front rims. 14mm slotted axle. still in good condition. strong setup, with slotted axle you keep the strength of 14mm axle and loose a little weight with the slotted axle. this rim is about 4 years old

Odyssey Evolver U brake. (black) Front Gyro with baby blue odyssey linear cables running from gyro to brakes. (had um lying around so i used these with a gyro. alot smoother then normal brake cables) brakes work great.

Solid Hella Light Bars. Odyssey chuck full o nuts stem. bars only used about 4 months. stem used about 2 years.

Mutiny Titanium Pegs 14mm hole. Right side installed. light, strong, and spark like crazy. still lots of life. used about 2 years

Demolition seat. odyssey seat post. (cut down and drilled for weight savings) redline seat clamp.(drilled for weight savings)

can't pass this up. setup is bulletproof and still fairly light. if you live in the DC area just let me know and i will let you check it out.

$750 firm.


this is in or around fairfax, VA

 

your crazy i tried to sell my STA500 for 300 with everything and no one would even buy it.

 

yeah, cause it's a STANDARD. and what did it have? 3 piece cranks?cassette? 25-9

i see used profile cranks on ebay now for $150 with 14 bids and 4 days left.
i've sold banged up frames alone for $100.

 

http://www.dragva.com/forums/s...17827

why don't you look yourself! do these look like 1pc cranks?

 

not dissing your thread bro just trying to tell you that people are ******* cheap and they want to ride shitty bikes for cheap, they don't want to fork out money for quality **** like mine and yours. nice bike

 

just saying. before i sold that **** for $300 i would just strip it and sell off the pieces.

 

I bought my 41 Thermal euro cranks brand new for 90 shipped. Got my 04 Fit for 160 shipped. In my opinion, you'd be better off parting it out.

 

well it's on ebay. i might end up parting it out if it doesn't sell.

the 41 thermal cranks are decent. made in china though i think.

you want to buy some profiles with titanium chainwheel and titanium spindle?? haha, weight is about 30 ounces
primo cassette/rim with profile titanium 9 tooth driver??
i got a KINK Jim Cielencki frame also. it's already been bid on on ebay though.

 

profile is the **** and its always been thats why its the priciest, i would part it out but no ones gonna buy that stuff from me, i'll just keep it and ride occasionally.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybridmoments &raquo;</TD></TR><TR><TD CLASS="quote">well it's on ebay. i might end up parting it out if it doesn't sell.

the 41 thermal cranks are decent. made in china though i think.

you want to buy some profiles with titanium chainwheel and titanium spindle?? haha, weight is about 30 ounces
primo cassette/rim with profile titanium 9 tooth driver??
i got a KINK Jim Cielencki frame also. it's already been bid on on ebay though.</TD></TR></TABLE>

They're a lot better than the poverty Pows I was riding. Lifetime warranty and 43 ozs. Can't beat it for the price. If I had the money, I'd scoop the Profiles up, but I'm trying to get new bars, forks, and a lighter wheel set. I'm sitting at 35 pounds right now, but most of it is the Alex triple walls.