jd3jdm got a new header ...STAINLESS
Member
Joined: Nov 2004
Posts: 1,519
Likes: 0
From: NorCar!?
Re: (hu)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hu »</TD></TR><TR><TD CLASS="quote">Was the header specifically built for his motor?</TD></TR></TABLE>
It was built knowing my engine specs if that's what you mean... but no, he didn't get to do any testing with my motor, or even get to look at it or the head before making it. I asked him about making a header similar to Scott's (2point6's) and we went from there because I have close to the same displacement.
Can't wait to get this beautiful piece on and get the motor running... looking to show everybody what the H can do when you put the right guys behind the building!
...and YES it's going in a prelude! A 4th gen to be exact!... lookin to show the lude guys some of the options out there and that we aren't completely forgotten!
Thanks again Randy
Modified by jd3jdm at 2:26 PM 2/26/2006
It was built knowing my engine specs if that's what you mean... but no, he didn't get to do any testing with my motor, or even get to look at it or the head before making it. I asked him about making a header similar to Scott's (2point6's) and we went from there because I have close to the same displacement.
Can't wait to get this beautiful piece on and get the motor running... looking to show everybody what the H can do when you put the right guys behind the building!
...and YES it's going in a prelude! A 4th gen to be exact!... lookin to show the lude guys some of the options out there and that we aren't completely forgotten!
Thanks again Randy
Modified by jd3jdm at 2:26 PM 2/26/2006
Member
Joined: Nov 2004
Posts: 1,519
Likes: 0
From: NorCar!?
Re: (CGags13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CGags13 »</TD></TR><TR><TD CLASS="quote">psssspssspssss
great work...hopefully johns new build can hang with the hduecedeucehatch yo!</TD></TR></TABLE>
Only like 4 people on this forum actually know what you mean by psssspssspssss chris... but it's ok, cuz I understand, haha. I promise it will keep up with your little egg...
great work...hopefully johns new build can hang with the hduecedeucehatch yo!</TD></TR></TABLE>
Only like 4 people on this forum actually know what you mean by psssspssspssss chris... but it's ok, cuz I understand, haha. I promise it will keep up with your little egg...
Trending Topics
Member
Joined: Nov 2004
Posts: 1,519
Likes: 0
From: NorCar!?
Re: (darkd1gt)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by darkd1gt »</TD></TR><TR><TD CLASS="quote">nice stuff man, when u gonna get it to the dyno? and get up to ryce night on wednesdays</TD></TR></TABLE>
soon enough!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NeriVTEC »</TD></TR><TR><TD CLASS="quote">are they specifically designed for your mods or ar they all alike?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jd3jdm »</TD></TR><TR><TD CLASS="quote">It was built knowing my engine specs if that's what you mean... but no, he didn't get to do any testing with my motor, or even get to look at it or the head before making it. I asked him about making a header similar to Scott's (2point6's) and we went from there because I have close to the same displacement.
</TD></TR></TABLE>
...So, as of now, it's a one of a kind
...but that's not to say that someone couldn't get a similar one made for their motor.
soon enough!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NeriVTEC »</TD></TR><TR><TD CLASS="quote">are they specifically designed for your mods or ar they all alike?</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jd3jdm »</TD></TR><TR><TD CLASS="quote">It was built knowing my engine specs if that's what you mean... but no, he didn't get to do any testing with my motor, or even get to look at it or the head before making it. I asked him about making a header similar to Scott's (2point6's) and we went from there because I have close to the same displacement.
</TD></TR></TABLE>
...So, as of now, it's a one of a kind
...but that's not to say that someone couldn't get a similar one made for their motor.
Member
Joined: Nov 2004
Posts: 1,519
Likes: 0
From: NorCar!?
Re: (safe driver)
couldn't tell ya. I'll be able to tell you how well it fits the 4th gen chasis soon though! I would have to know if there are crossmember differences... which I'm sure there are. If you measure how far away it is from the block, then I'll try and do some speculating for you.
Member
Joined: Nov 2004
Posts: 1,519
Likes: 0
From: NorCar!?
Re: (jd3jdm)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skunked »</TD></TR><TR><TD CLASS="quote">Can't wait to see John's new setup in action </TD></TR></TABLE>
Me neither! It'll be time to "schwag" some people then! Right M-Dog? LOL
Me neither! It'll be time to "schwag" some people then! Right M-Dog? LOL
Honda-Tech Member
Joined: Aug 2002
Posts: 12,464
Likes: 0
From: NOR CAL
Re: (jd3jdm)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jd3jdm »</TD></TR><TR><TD CLASS="quote">
Me neither! It'll be time to "schwag" some people then! Right M-Dog? LOL</TD></TR></TABLE>
It's defiantly going to make some noise
Me neither! It'll be time to "schwag" some people then! Right M-Dog? LOL</TD></TR></TABLE>
It's defiantly going to make some noise
Guest
Posts: n/a
Re: (2point6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2point6 »</TD></TR><TR><TD CLASS="quote">Very, Very nice. The stainless looks killer, But I think the black looks sexy too.... </TD></TR></TABLE>Yes it looks good too
</TD></TR></TABLE>Yes it looks good too