Anyone make me a couple of collectors in mild steel?
Thread Starter
Honda-Tech Member
Joined: Jan 2004
Posts: 672
Likes: 0
From: Silver Spring, MD, USA
Anyone make me a couple of collectors in mild steel?
I would need three 2 to 1 collectors.
Would need a 1.5" sch40 collector with an outlet of 2". So the inlets are 1.5" each and then outlet is 2". Would need 2 of those. Then one with 2" sch40 collect into a t3 flange. Would need spayed inlets on all of them. Like in the picture below somewhat (without the extra piping after collector and no slip fit). Need them done in mild steel. Possible? let me know
Modified by vr6chris at 11:37 PM 2/24/2006
Would need a 1.5" sch40 collector with an outlet of 2". So the inlets are 1.5" each and then outlet is 2". Would need 2 of those. Then one with 2" sch40 collect into a t3 flange. Would need spayed inlets on all of them. Like in the picture below somewhat (without the extra piping after collector and no slip fit). Need them done in mild steel. Possible? let me know
Modified by vr6chris at 11:37 PM 2/24/2006
Thread
Thread Starter
Forum
Replies
Last Post