FS: 01 b18c1 motor with ctr cams and more!!!
Thread Starter
Honda-Tech Member
Joined: Jun 2003
Posts: 1,037
Likes: 0
From: Virginia, United states
Hey guys I am finally convinced I want a k swap. Why? because I have been searching for ways to set my car apart and the jdm front wasn't enough. Thought about turbo but also dime o dozen. But k series, has been done but not that much. So here it goes
all off an 01 gsr, regular acura maitnence (mileage check ups and such)
oil changed every 3k miles with moble one synthetic.
motor comes with
ITR valve cover
ITR valve springs and retieners
CTR cams
AEM cam gears
AEM fuel rail
AEM regulator
AEM underdrive pullies
AC compressor, power steering unit
AEBS intake manifold
Password cf intake
DC ss jdm itr 4-1 ss header 2.5 collector
Omnie 2.5 test pipe (for header)
uncut gsr harness
01 gsr ecu
01 gsr tranny
gsr axles
No grinds or any probs with the tranny, everything is in perfect condition. If anyone has seen my engine bay you would know. Cams installed by Jerry at acura in chantilly. all other work done on my own.
This is not to be parted out, unless you want tranny long block, header, or intake. Other than that I don't feel like taking the internals apart so please don't ask.
Won't part anything out untill the long block is sold, or of course some one wants it all.
89k miles (highway going from va beach to nova for school)
pics on request
I am in nova in 5 days
and motor will be taken out when a buyer is found
Help me do this k swap and buy it.
AIM:chexmix0331
pm or aim to ask more
all off an 01 gsr, regular acura maitnence (mileage check ups and such)
oil changed every 3k miles with moble one synthetic.
motor comes with
ITR valve cover
ITR valve springs and retieners
CTR cams
AEM cam gears
AEM fuel rail
AEM regulator
AEM underdrive pullies
AC compressor, power steering unit
AEBS intake manifold
Password cf intake
DC ss jdm itr 4-1 ss header 2.5 collector
Omnie 2.5 test pipe (for header)
uncut gsr harness
01 gsr ecu
01 gsr tranny
gsr axles
No grinds or any probs with the tranny, everything is in perfect condition. If anyone has seen my engine bay you would know. Cams installed by Jerry at acura in chantilly. all other work done on my own.
This is not to be parted out, unless you want tranny long block, header, or intake. Other than that I don't feel like taking the internals apart so please don't ask.
Won't part anything out untill the long block is sold, or of course some one wants it all.
89k miles (highway going from va beach to nova for school)
pics on request
I am in nova in 5 days
and motor will be taken out when a buyer is found
Help me do this k swap and buy it.
AIM:chexmix0331
pm or aim to ask more
bump for a good guy with a clean *** car...K series huh bro? I just talked to you like a week ago about going turbo..but somehow if it's possible, K sounds alot better
Someone buy his motor!
Someone buy his motor!
another bump for a strong motor, someone needs to buy this
And good luck, from seeing what you've done with your car already, i'm sure you'll find someway to make it hott
it just amazes me, I THOUGHT about doing it, but i just couldn't justify it, but i'm trying to do anything else I can...gotta be different ya know?
And good luck, from seeing what you've done with your car already, i'm sure you'll find someway to make it hott
it just amazes me, I THOUGHT about doing it, but i just couldn't justify it, but i'm trying to do anything else I can...gotta be different ya know?
Guest
Posts: n/a
bump for my homie brent... cllleeeeaaan *** car, clean *** motor!! have seen it many times in person... pulls hard, lots of goodies...and it's not a frankenstein motor... has never left the car it came in from factory!
someone buy this! : )
someone buy this! : )
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
spooncivic1
All Motor / Naturally Aspirated
9
Oct 6, 2004 03:43 AM



