putting the motor back together. i have aem cam gears. the white mark is lined up with the mark on the block. i cant get the top marks on the gears at exactly 12o'clock. i also cant exactly get the marks on the sides of the cam gers to line up with each otehr. also....at TDC should the rotor point to cyl (about 4-5 o'clock)?
how can i get this all lined up? how do i make sure im not one tooth off on the cam gears? i thought all valves were shut at TDC but im fighting valves in cyl4 while tryin to get it all lined up. im kinda lost. let me know....