Peeps my new valve cover.
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,869
Likes: 0
From: East of Sac, CA, USA
Peeps my new valve cover.
Nothin too special just shaved and painted my stock valve cover with black wrinkle paint. I think it turned out pretty good. I took a few pics...
Honda-Tech Member
Joined: Sep 2001
Posts: 6,045
Likes: 1
From: The burbs of illadelph, USA
Re: Peeps my new valve cover. (VTEC_Club)
looks good, make sure you stay proactive about keeping it clean and shiney. I didnt with my shaved/wrinkle coated vc and it became dull and doesnt look half as good as it did the day i sprayed it.
shaved sohc
shaved sohc
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,869
Likes: 0
From: East of Sac, CA, USA
Re: (dontgivafuk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dontgivafuk »</TD></TR><TR><TD CLASS="quote">whats the process?
and how long does it take</TD></TR></TABLE>
I took an air grinder and removed the HONDA letters, that took about 30-45 minutes. After that I just cleaned the valve cover w/ brake clean and sprayed it. You have to use a few heavy coates of paint. The paint took about 2.5 hours to dry cause it's pretty cold where I am at.
and how long does it take</TD></TR></TABLE>
I took an air grinder and removed the HONDA letters, that took about 30-45 minutes. After that I just cleaned the valve cover w/ brake clean and sprayed it. You have to use a few heavy coates of paint. The paint took about 2.5 hours to dry cause it's pretty cold where I am at.
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,869
Likes: 0
From: East of Sac, CA, USA
Re: (I Have an STD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by I Have an STD »</TD></TR><TR><TD CLASS="quote">its looks good, but that is one SORRY engine bay</TD></TR></TABLE>
Agreed, I have only had the car for a few months. I have big plans in the future as far as motor/engine bay goes
. I have just been doing exterior and suspension mods for now.
Agreed, I have only had the car for a few months. I have big plans in the future as far as motor/engine bay goes
. I have just been doing exterior and suspension mods for now.
for the looks
Member
Joined: Nov 2003
Posts: 7,240
Likes: 1
From: Michigan State University, USA
Re: Peeps my new valve cover. (jDmImagE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jDmImagE »</TD></TR><TR><TD CLASS="quote">Not bad.</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 2,869
Likes: 0
From: East of Sac, CA, USA
Re: (EmoHatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EmoHatch »</TD></TR><TR><TD CLASS="quote">snake skin yal</TD></TR></TABLE>
you know how i roll, stock single cam wit dat snake skin valve cover.
you know how i roll, stock single cam wit dat snake skin valve cover.
Re: Peeps my new valve cover. (jDmImagE)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jDmImagE »</TD></TR><TR><TD CLASS="quote">Not bad.</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
mattb16a1civic
Honda / Acura
25
May 15, 2005 12:18 PM