WTB: Built B18C1 Block for Turbo A.S.A.P.

Reply Subscribe

Thread Tools

Search this Thread

Feb 17, 2006 | 05:45 AM

skrigz

Thread Starter

Honda-Tech Member

Joined: Nov 2003

Posts: 261

Likes: 0

From: Baton Rouge, LA, 70816

WTB: Built B18C1 Block for Turbo A.S.A.P.

I want a b18c1 block that is built for turbo with low compression pistions and sleeved and in good condition not to many miles on it. Also i want it to have a balanced and polished crank

Modified by skrigz at 11:26 PM 2/17/2006

Feb 17, 2006 | 08:25 PM

skrigz

Thread Starter

Honda-Tech Member

Joined: Nov 2003

Posts: 261

Likes: 0

From: Baton Rouge, LA, 70816

Re: WTB: Built B18C1 Block for Turbo A.S.A.P. (skrigz)

bump

Feb 17, 2006 | 09:59 PM

boostinaintez

Honda-Tech Member

Joined: Oct 2005

Posts: 648

Likes: 0

From: wi

Re: WTB: Built B18C1 Block for Turbo A.S.A.P. (skrigz)

my buddies got everything for sale his whole turbo setup its awesome. pm and i wil give you the link for pix

Feb 19, 2006 | 10:55 AM

sol_1320

Junior Member

Joined: Nov 2003

Posts: 680

Likes: 0

From: San Diego area, ca

Re: WTB: Built B18C1 Block for Turbo A.S.A.P. (Boostinaintez)

Speak with Arturbo https://honda-tech.com/zero...d=346 if you are really serious he can point you the right direction.

Feb 19, 2006 | 08:40 PM

skrigz

Thread Starter

Honda-Tech Member

Joined: Nov 2003

Posts: 261

Likes: 0

From: Baton Rouge, LA, 70816

Re: WTB: Built B18C1 Block for Turbo A.S.A.P. (sol_1320)

k thx i PMed them

Feb 20, 2006 | 04:27 AM

crx34

Joined: Feb 2005

Posts: 335

Likes: 0

From: IL, what do u think

Re: WTB: Built B18C1 Block for Turbo A.S.A.P. (skrigz)

I have a built B16A. Resleeved with Darton Sleeves, JE Pistons 9:1 Compression, Eagle H-Beam Rods, Eagle LS Crank, ACL or King Bearings. Motor Bored to 84mm, Stroked to 89mm. Motor blueprinted and balanced. All work was done by ARI, out of Jupiter FL. $1800.00. All parts cost $2500 and machine/assembly work cost $1800. Never been run with this set up.

Thanks