*****FS: Built LS B18B1 Shortblock*****
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
*****FS: Built LS B18B1 Shortblock*****
~~~ 1600shipped to anywhere in the US ~~~
***NEW PICS***
**Hey I have here a built B18B1 block**
*About 3k miles on the block
*ARP headstuds
*Darton sleeved at stock bore
*Arias 9:1 comp. pistons
*Eagle Rods
*Micropolished and balance LS crank
*Golden Eagle LS/VTEC kit
*New oil pump/ Water pump ect. pretty much everything except oil pan
Was running before I pulled it out, had no problems. The reason im selling this block is because I had bent some valves. Decided to pull the head out but instead i decided to just pull the whole motor out. Now the whole motor is out and im deciding to build another motor from scratch instead.
Problems:
*some ARP studs have been oversized because my builder said that some needed to be rethreaded. Now there is one of the studs that is stripping and either need to be rethreaded/replaced. I dont know if you can change them all for new ARP's or change them back to OEM.
*Because of some oversized ARP headstuds.... the headgasket takes a little more time to put on because of it.
*one of the tranny bolts wont thread in the block (red circle). bought the block that way.... but the rest bolt in and holds fine, no problems
Thats all the pics I have of the block.... I still need to pull the cylinder head out
Just throw me some offers
Modified by H.A.R.T B18C1EG6 at 10:18 PM 2/20/2006
Modified by H.A.R.T B18C1EG6 at 1:00 PM 2/23/2006
Modified by H.A.R.T B18C1EG6 at 1:01 PM 2/23/2006
***NEW PICS***
**Hey I have here a built B18B1 block**
*About 3k miles on the block
*ARP headstuds
*Darton sleeved at stock bore
*Arias 9:1 comp. pistons
*Eagle Rods
*Micropolished and balance LS crank
*Golden Eagle LS/VTEC kit
*New oil pump/ Water pump ect. pretty much everything except oil pan
Was running before I pulled it out, had no problems. The reason im selling this block is because I had bent some valves. Decided to pull the head out but instead i decided to just pull the whole motor out. Now the whole motor is out and im deciding to build another motor from scratch instead.
Problems:
*some ARP studs have been oversized because my builder said that some needed to be rethreaded. Now there is one of the studs that is stripping and either need to be rethreaded/replaced. I dont know if you can change them all for new ARP's or change them back to OEM.
*Because of some oversized ARP headstuds.... the headgasket takes a little more time to put on because of it.
*one of the tranny bolts wont thread in the block (red circle). bought the block that way.... but the rest bolt in and holds fine, no problems
Thats all the pics I have of the block.... I still need to pull the cylinder head out
Just throw me some offers
Modified by H.A.R.T B18C1EG6 at 10:18 PM 2/20/2006
Modified by H.A.R.T B18C1EG6 at 1:00 PM 2/23/2006
Modified by H.A.R.T B18C1EG6 at 1:01 PM 2/23/2006
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">up again</TD></TR></TABLE>
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (OrangeCiviC251)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OrangeCiviC251 »</TD></TR><TR><TD CLASS="quote">curious what are you wanting?</TD></TR></TABLE>
PM'ed
PM'ed
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">up</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (Da1spaz247)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Da1spaz247 »</TD></TR><TR><TD CLASS="quote">how much shipped to 53130?</TD></TR></TABLE>
pm'ed you
pm'ed you
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (whophlungpoo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by whophlungpoo »</TD></TR><TR><TD CLASS="quote">so how much are you wanting?</TD></TR></TABLE>
pm'ed you
pm'ed you
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">up</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>
</TD></TR></TABLE>
Thread
Thread Starter
Forum
Replies
Last Post
FS: Built LS Block (b18a) Built GSR Head, Twin Plate, Fluidampr, OS Giken, Darton, CP, Manley, Golde
wantboost
Classifieds: Forced Induction
24
Sep 2, 2006 06:48 PM
FS IN GA: FS: Built LS Block (b18a) Built GSR Head, Twin Plate, Fluidampr, OS Giken, Darton, CP, Man
wantboost
Southeast (Sales)
12
Aug 23, 2006 06:21 AM
H.A.R.T B18C1EG6
Classifieds: Forced Induction
44
Mar 22, 2006 10:26 PM
