*****FS: Built LS B18B1 Shortblock*****
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
*****FS: Built LS B18B1 Shortblock*****
~~~ 1600shipped to anywhere in the US ~~~
***NEW PICS***
**Hey I have here a built B18B1 block**
*About 3k miles on the block
*ARP headstuds
*Darton sleeved at stock bore
*Arias 9:1 comp. pistons
*Eagle Rods
*Micropolished and balance LS crank
*Golden Eagle LS/VTEC kit
*New oil pump/ Water pump ect. pretty much everything except oil pan
Was running before I pulled it out, had no problems. The reason im selling this block is because I had bent some valves. Decided to pull the head out but instead i decided to just pull the whole motor out. Now the whole motor is out and im deciding to build another motor from scratch instead.
Problems:
*some ARP studs have been oversized because my builder said that some needed to be rethreaded. Now there is one of the studs that is stripping and either need to be rethreaded/replaced. I dont know if you can change them all for new ARP's or change them back to OEM.
*Because of some oversized ARP headstuds.... the headgasket takes a little more time to put on because of it.
*one of the tranny bolts wont thread in the block (red circle). bought the block that way.... but the rest bolt in and holds fine, no problems
Thats all the pics I have of the block.... I still need to pull the cylinder head out
Just throw me some offers
Modified by H.A.R.T B18C1EG6 at 10:19 PM 2/20/2006
Modified by H.A.R.T B18C1EG6 at 1:01 PM 2/23/2006
***NEW PICS***
**Hey I have here a built B18B1 block**
*About 3k miles on the block
*ARP headstuds
*Darton sleeved at stock bore
*Arias 9:1 comp. pistons
*Eagle Rods
*Micropolished and balance LS crank
*Golden Eagle LS/VTEC kit
*New oil pump/ Water pump ect. pretty much everything except oil pan
Was running before I pulled it out, had no problems. The reason im selling this block is because I had bent some valves. Decided to pull the head out but instead i decided to just pull the whole motor out. Now the whole motor is out and im deciding to build another motor from scratch instead.
Problems:
*some ARP studs have been oversized because my builder said that some needed to be rethreaded. Now there is one of the studs that is stripping and either need to be rethreaded/replaced. I dont know if you can change them all for new ARP's or change them back to OEM.
*Because of some oversized ARP headstuds.... the headgasket takes a little more time to put on because of it.
*one of the tranny bolts wont thread in the block (red circle). bought the block that way.... but the rest bolt in and holds fine, no problems
Thats all the pics I have of the block.... I still need to pull the cylinder head out
Just throw me some offers
Modified by H.A.R.T B18C1EG6 at 10:19 PM 2/20/2006
Modified by H.A.R.T B18C1EG6 at 1:01 PM 2/23/2006
Honda-Tech Member
Joined: Oct 2004
Posts: 202
Likes: 2
From: Western MD USA
Re: *****FS: Built LS B18B1 Shortblock***** (H.A.R.T B18C1EG6)
my stock block with darton sleeves not yet in the block you keep your pistons ill use my 8.5.1 compreesion pistons and 200.00let me know email me
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: *****FS: Built LS B18B1 Shortblock***** (dsmarefaster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dsmarefaster »</TD></TR><TR><TD CLASS="quote">my stock block with darton sleeves not yet in the block you keep your pistons ill use my 8.5.1 compreesion pistons and 200.00let me know email me</TD></TR></TABLE>
nah sorry man... just lookin to sell the block. I already have another
nah sorry man... just lookin to sell the block. I already have another
Trending Topics
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (Boosted Rex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Rex »</TD></TR><TR><TD CLASS="quote">how much u looking to get for the short block considering its problems </TD></TR></TABLE>
honestly not lookin to get a bundle out of it.... around 1800 or lower maybe? just shoot offers at me
honestly not lookin to get a bundle out of it.... around 1800 or lower maybe? just shoot offers at me
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (beyondspecs_jamar)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beyondspecs_jamar »</TD></TR><TR><TD CLASS="quote">bump fo the homie</TD></TR></TABLE>
thanx jamar
thanx jamar
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me </TD></TR></TABLE>
</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">up</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me </TD></TR></TABLE>
</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me
</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me
</TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">just shoot offers at me
</TD></TR></TABLE>
Honda-Tech Member
Joined: Jul 2003
Posts: 2,546
Likes: 0
From: Logan, Ut, US
Re: (H.A.R.T B18C1EG6)
i talked to this guy a few times. really committed and honest seller. took time to answer all my questions. but i decided to go a different route. i guess that means this is your lucky day so buy his ****!!!
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (Boosted Rex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boosted Rex »</TD></TR><TR><TD CLASS="quote">i talked to this guy a few times. really committed and honest seller. took time to answer all my questions. but i decided to go a different route. i guess that means this is your lucky day so buy his ****!!!</TD></TR></TABLE>
haha thanx.... good luck w/ your project
haha thanx.... good luck w/ your project
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">up w/ new pics</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (H.A.R.T B18C1EG6)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H.A.R.T B18C1EG6 »</TD></TR><TR><TD CLASS="quote">up w/ new pics</TD></TR></TABLE>
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Jul 2004
Posts: 6,853
Likes: 2
From: PLAYBOY MANSION
Re: (beyondspecs_jamar)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beyondspecs_jamar »</TD></TR><TR><TD CLASS="quote">ttt</TD></TR></TABLE>
thanx
thanx
