Hey folks, I'm in the process of buidling a 93 G2 GSR, and just wanted to share the build. My pockets are only so deep, so the project will probably take the next year to complete. As of now there are alot of plans for the car, and things are moving slowly along. Moving into a new house while starting a build is not alot of fun. So stay tuned for what I hope will be the world's fastest G2 Integra.

Stay tuned for pics as the project starts.

 

good luck man, and have fun while you're at it!

 

I've always wanted to see a G2 teg in SFWD or even HR. Good luck man. I know the 1st state guys had one or two and a guy that I met at E-town 2 yrs. ago that was going 10.90's w/a straight LS in his (car was in HR trim though, lexan etc.).

Phil

 

Well this car will be far from HR trim. We are retaining as much of the stock car as we can. I was trying to get the chassis guys to even design the rolcage around the back seat, not that it would be useable. And I too have seen the G2's from FSmoto. I have actually bought stuf from them for the car, ie. Full-Race Traction Bars.

 

Good luck with your project sir. I was building my 2nd gen with the same exact goals in mind but then I came across a Civic coupe chassis that I think will be a little bit easier to build. The 2nd gen is now going to be a weekend/carpet queen.
-Thomas

 

oohh ohhh...looks like i have some competion....its all good....good luck on your build....if u need any help dont be afraid to ask!!!

 

oh trust me I won't be afraid to ask. I have pletny of questions, but I figure I'll ask them when the time comes. Thanks to everyone for the positive feedback.

 

Well we're finally getting started on this project. Although we've gone alittle different way then we had originally expected. New motor program....

Gutting the car.






The Motor, Or I should say the block, we're using the K24 Block/K20 Head

 

good luck...we should have our k20 turbo eg ready for the moroso nhra event coming up..spfwd trim built motor T72 etc..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cubish &raquo;</TD></TR><TR><TD CLASS="quote">good luck...we should have our k20 turbo eg ready for the moroso nhra event coming up..spfwd trim built motor T72 etc..</TD></TR></TABLE>

t72 on a k series in sfwd?

 

Do they make K20 mounts for 2nd gen Integras now? Or is it custom?

Best of luck on the build!

 

looks like an awesome build!

im looking to build a g2 with my sleeved lsvtec in it in the future, should be fun. good luck wiht the rest of the build, i think it will come out awesome

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cubish &raquo;</TD></TR><TR><TD CLASS="quote">good luck...we should have our k20 turbo eg ready for the moroso nhra event coming up..spfwd trim built motor T72 etc..</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by miller &raquo;</TD></TR><TR><TD CLASS="quote">

t72 on a k series in sfwd?</TD></TR></TABLE>

Unfortunately NHRA has limited the turbo size for K20s in SportFWD , turbo limit is now 66mm inducer wheel, 67.36 or close to that at the inlet

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

Unfortunately NHRA has limited the turbo size for K20s in SportFWD , turbo limit is now 66mm inducer wheel, 67.36 or close to that at the inlet </TD></TR></TABLE>

thats what i was getting at

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by miller &raquo;</TD></TR><TR><TD CLASS="quote">

thats what i was getting at </TD></TR></TABLE>

I was just agreeing with you and stating the rules BUT here they are anyways

"Page 29 (eff 06/21/06)
Supercharger, Turbocharger: Add “K Series Engines limited to a maximum 66mm turbo, where the maximum compressor housing inducer diameter is 67.37 mm, measured at the point where the leading edge of the compressor wheel meets the housing” after the fifth sentence in the first paragraph."

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by miller &raquo;</TD></TR><TR><TD CLASS="quote">

thats what i was getting at </TD></TR></TABLE>

...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostfeen &raquo;</TD></TR><TR><TD CLASS="quote">

... </TD></TR></TABLE>

NUTSWINGER!!!!!!!!!!!!!!!!!!!!!!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

NUTSWINGER!!!!!!!!!!!!!!!!!!!!!!!! </TD></TR></TABLE>


Isn't everyone on H-T LOL

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

NUTSWINGER!!!!!!!!!!!!!!!!!!!!!!!! </TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BoogieDownBrown &raquo;</TD></TR><TR><TD CLASS="quote">


Isn't everyone on H-T LOL</TD></TR></TABLE>

Yeah!!!!!!!!!!!!!


BTW how did you guys do at Pan Ams? Times? I haven't seen any results from the event.

Aaron hit a BRUTHA UP!!! errrr wannabe BRUTHA! lololol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

Yeah!!!!!!!!!!!!!


BTW how did you guys do at Pan Ams? Times? I haven't seen any results from the event.

Aaron hit a BRUTHA UP!!! errrr wannabe BRUTHA! lololol</TD></TR></TABLE>


Check your IM. dont wanna jack the thread.

 

The mount kit is not out yet, hopefully it will be soon *hint hint*, *cough hasports*.

And yes we know about the 66mm turbo rule, thats the reason we're taking our time to build it. Making power from the K is easy

 

we started building the car before the rule change.. we are going to run the hatch in probably quick 16 for the local event till turbonetics sends us a new turbo..



keep us updated


Modified by cubish at 11:23 PM 7/18/2006

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

NUTSWINGER!!!!!!!!!!!!!!!!!!!!!!!! </TD></TR></TABLE> lol

 

Well I should have more pictures in a couple days, sumped tank should be done soon, as well as the 10pt. cage, window net, and parachute mount. I also just ordered a set of KSport's 36 way adjustable with custom spring rates.

 

damn i knew this car looked familiar