custom crower grind, .507 lift, perfect conditon..less the an 50 passes on them...will include modified rockers - 600






Modified by Rusty Shackleferd at 3:09 PM 2/15/2006

 

 

bump

 

have those cams been run?

how did they perform?

why are you selling?

 

are they custom cams? is there a part number for them so i can search for the specs through crower.

 

if you need to ask those questions then personally those cams are not for you.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by johnkimble &raquo;</TD></TR><TR><TD CLASS="quote">have those cams been run?

how did they perform?

why are you selling? </TD></TR></TABLE>

made less that 50 passes on them

made good power...peaked at 9200 on my 85x89 motor

im building a k24 motor....


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AlienKrOZ &raquo;</TD></TR><TR><TD CLASS="quote">are they custom cams? is there a part number for them so i can search for the specs through crower.</TD></TR></TABLE>

yes they are custom....giving up that part number would be like posting blue prints to the stealth fighter and i cant do that

here and see them in action here... http://twminduction.com/Thrott....html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Rusty Shackleferd &raquo;</TD></TR><TR><TD CLASS="quote">

here and see them in action here... http://twminduction.com/Thrott....html
</TD></TR></TABLE>

dang! i saw that vid long ago....
i like when the needle hits 8-9 rpms and dont know where to go...
what CR did u used and valvetrain?

 

THAT **** IS SICK

 

 

GOOD PRICE

 

what is needed to run these cams? which valvetrain did u go with? crower dual spring vtec? or something else?

 

how much hp were you putting out with these? Don't have to give exact numbers just around how much.