FS: Garrett turbo god for 550whp, topmount mani w/ 3" DP
Thread Starter
Honda-Tech Member
Joined: Sep 2003
Posts: 8,357
Likes: 5
From: CT
FS: Garrett turbo good for 550whp, topmount mani w/ 3" DP
The time has come for me to upgrade and will no longer be needing this stuff. As most of you know I am extreemly picky about the parts that I use and the condition of my equipment. You can get this stuff with confidence and now that it will not let you down....
The Garrett turbo. Made custom for me by STC (TheShodan). I paid $850 a little over a year ago and this thing is in great condition still. The compressor cover and turbing housing are both ceramic coated which increase flow and reduce exterior/under hood temps. There are no chips or bent fins. There is no play in the shaft in any direction. It is capable of much more! It was rated to put out 500-550whp for a B18C motor. You will have to contact me for more info/ details on this turbo.
It made 320whp 222ft/lbs @9psi on my 100% stock GSR motor.... here is the dyno to proove it.
Turbo pics
This is when I first got it
This is now
I am asking $700 shipped for the turbo. TURBO SOLD!
**********************************************
The manifold and downpipe. This homemade top-mount manifold is one of a kind peice. It is rare that you will find a mani that is constructed of 100% 316 stainless (tubing) and 100% 321 stainless steel (flanges). Not even Full-Race does that! This manifold is indestructible and includes a lifetime warranty against cracking.
Along with the manifold is the down pipe. It also is made of 100% stainless 316 and 321 with a 3" flex that is also stainless. It has a 4 bolt 2.5" flange and flares to 3". The dp clears the oil pan and a half size radiator with no problem. At the end there is also a stainless O2 bung for a wide band O2 sensor (the one in the picture is not included).
Pics of the Mani/3" DP
This is what it looked like when I forst got it
This is now
I paid $1500 for this manifold and down pipe almost a year ago. I am asking $1100 shipped. GONE!
**********************************************
I will let both go together for $1750 shipped.
Thanks for looking
Modified by tepid1 at 4:10 PM 2/7/2006
Modified by tepid1 at 4:12 PM 2/7/2006
Modified by tepid1 at 4:16 AM 2/20/2006
Modified by tepid1 at 5:05 PM 2/20/2006
The Garrett turbo. Made custom for me by STC (TheShodan). I paid $850 a little over a year ago and this thing is in great condition still. The compressor cover and turbing housing are both ceramic coated which increase flow and reduce exterior/under hood temps. There are no chips or bent fins. There is no play in the shaft in any direction. It is capable of much more! It was rated to put out 500-550whp for a B18C motor. You will have to contact me for more info/ details on this turbo.
It made 320whp 222ft/lbs @9psi on my 100% stock GSR motor.... here is the dyno to proove it.
Turbo pics
This is when I first got it
This is now
I am asking $700 shipped for the turbo. TURBO SOLD!
**********************************************
The manifold and downpipe. This homemade top-mount manifold is one of a kind peice. It is rare that you will find a mani that is constructed of 100% 316 stainless (tubing) and 100% 321 stainless steel (flanges). Not even Full-Race does that! This manifold is indestructible and includes a lifetime warranty against cracking.
Along with the manifold is the down pipe. It also is made of 100% stainless 316 and 321 with a 3" flex that is also stainless. It has a 4 bolt 2.5" flange and flares to 3". The dp clears the oil pan and a half size radiator with no problem. At the end there is also a stainless O2 bung for a wide band O2 sensor (the one in the picture is not included).
Pics of the Mani/3" DP
This is what it looked like when I forst got it
This is now
I paid $1500 for this manifold and down pipe almost a year ago. I am asking $1100 shipped. GONE!
**********************************************
I will let both go together for $1750 shipped.
Thanks for looking
Modified by tepid1 at 4:10 PM 2/7/2006
Modified by tepid1 at 4:12 PM 2/7/2006
Modified by tepid1 at 4:16 AM 2/20/2006
Modified by tepid1 at 5:05 PM 2/20/2006
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Sep 2003
Posts: 8,357
Likes: 5
From: CT
Re: FS: Garrett turbo good for 550whp, topmount mani w/ 3" DP (tepid1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tepid1 »</TD></TR><TR><TD CLASS="quote">responded to a few pm's.... come on people.
Shoot me an offer!</TD></TR></TABLE>
Shoot me an offer!</TD></TR></TABLE>
very nice set up... damn tickets to pay for instead 
Junior Member
Joined: Jul 2004
Posts: 335
Likes: 0
From: CT
Re: FS: Garrett turbo good for 550whp, topmount mani w/ 3" DP (tepid1)
hey chris, its waleed from the avcrad, dude someone is in the process of buying my turbo kit now, as soon as he pays me by like friday hopefully im gonna buy ur stuff so hopefully u'll still have it til then, i'll call u as soon as i get the money. thanks btw i think im only gonna get the manifold and downpipe if thats cool, i'm gonna go a differnt route wtih the turbo. would u still add in ur 38mm tial waistgate also so all 3 items for $1,100. lmk thanks
Thread
Thread Starter
Forum
Replies
Last Post
roadracer4life
Classifieds: Forced Induction
9
Jun 22, 2010 01:41 PM
XES
Classifieds: Forced Induction
1
Jul 21, 2008 09:41 PM
tepid1
Northeast (Sales)
14
Feb 20, 2006 04:04 PM