Brand New t3/t04e and audi external wastegate
Location is Portland, Oregon.
<FONT COLOR="red">Turbo is the XSPower one that have the 2 piece cast housing, I am told that now they are welded together by Donald125 who resells this **** too. There is no evidence of 'glue' on this turbo anywhere. If you want I can have the housing tacked together by our tig welder at work for re-assurance. I am sure that as long as you prime this turbo well and get oil flowing in it before you spin it up that it will work just fine for you, I was planning on running it.
Right now you can buy it now these turbos on ebay for $275. You can take mine for $225 shipped.
.63 AR Exhaust Housing/.50 AR Compressor Housing/57 Trim Compressor wheel
</FONT>



<FONT COLOR="orange">The wastegate is the Audi External, manufactured by HKS for Audi, most of these sport a 4psi spring, can be modified to be adjustable.
I will include with this a 90* elbow with a flange already made for it, so you don't have to. I made this for my old HF mani setup and never used it.
Normally these sell for about $60 privately and up to $100 on ebay. Mine also comes with the flange that you would otherwise have to make, and the little dumptube flanges as well, so I am gonna say $80 shipped.</FONT>

Payments are through paypal only. I don't deal with money orders and **** like that, scam someone else.
<FONT COLOR="red">Turbo is the XSPower one that have the 2 piece cast housing, I am told that now they are welded together by Donald125 who resells this **** too. There is no evidence of 'glue' on this turbo anywhere. If you want I can have the housing tacked together by our tig welder at work for re-assurance. I am sure that as long as you prime this turbo well and get oil flowing in it before you spin it up that it will work just fine for you, I was planning on running it.
Right now you can buy it now these turbos on ebay for $275. You can take mine for $225 shipped.
.63 AR Exhaust Housing/.50 AR Compressor Housing/57 Trim Compressor wheel
</FONT>



<FONT COLOR="orange">The wastegate is the Audi External, manufactured by HKS for Audi, most of these sport a 4psi spring, can be modified to be adjustable.
I will include with this a 90* elbow with a flange already made for it, so you don't have to. I made this for my old HF mani setup and never used it.
Normally these sell for about $60 privately and up to $100 on ebay. Mine also comes with the flange that you would otherwise have to make, and the little dumptube flanges as well, so I am gonna say $80 shipped.</FONT>

Payments are through paypal only. I don't deal with money orders and **** like that, scam someone else.
is this one of those 2 earlier turbos that fell apart from xs power...how long ago did you get this badboy?? i take it is BRAND NEW....
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Perfourmance »</TD></TR><TR><TD CLASS="quote">is this one of those 2 earlier turbos that fell apart from xs power...how long ago did you get this badboy?? i take it is BRAND NEW....</TD></TR></TABLE>
all of your questions are actually answered in the thread.
yes its brand new, never used, have had it for only a short time.
there are two 2 piece cast housing xspower turbos. the first was glued together, and were known to fall apart. I am being told they stopped gluing the 2 piecers, and tig them together now by one of the people who distirbutes them
all of your questions are actually answered in the thread.
yes its brand new, never used, have had it for only a short time.
there are two 2 piece cast housing xspower turbos. the first was glued together, and were known to fall apart. I am being told they stopped gluing the 2 piecers, and tig them together now by one of the people who distirbutes them
Thread
Thread Starter
Forum
Replies
Last Post
marcj
Classifieds: Forced Induction
5
Sep 18, 2008 09:13 PM
Da1spaz247
For Sale
1
Sep 30, 2007 12:04 PM
turbodav
Classifieds: Forced Induction
42
Sep 6, 2004 11:25 AM




