? about J's racing type s body kit
Honda-Tech Member
Joined: Jan 2005
Posts: 5,997
Likes: 0
From: never never land
Re: ? about J's racing type s body kit (s2kc's)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s2kc’s »</TD></TR><TR><TD CLASS="quote">Anyone know about the fitment of this kit? Any pictures of a silverstone with it?
Thanks in advance!!
</TD></TR></TABLE>
you need to trim some of it so it can fit under the head light ballast...
Thanks in advance!!
</TD></TR></TABLE>you need to trim some of it so it can fit under the head light ballast...
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 294
Likes: 0
From: Thornton, CO, US
Re: ? about J's racing type s body kit (*****ieboy)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by *****ieboy »</TD></TR><TR><TD CLASS="quote">
one of my friends car on the left.</TD></TR></TABLE>
that looks good!! then again, the one on the right looks almost just as good for a fraction of the price. Other than OEM and Mugen, is there any other lips for the ap2 available?
one of my friends car on the left.</TD></TR></TABLE>
that looks good!! then again, the one on the right looks almost just as good for a fraction of the price. Other than OEM and Mugen, is there any other lips for the ap2 available?
Honda-Tech Member
Joined: Jan 2005
Posts: 5,997
Likes: 0
From: never never land
Re: ? about J's racing type s body kit (s2kc's)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s2kc’s »</TD></TR><TR><TD CLASS="quote">
that looks good!! then again, the one on the right looks almost just as good for a fraction of the price. Other than OEM and Mugen, is there any other lips for the ap2 available?</TD></TR></TABLE>
one other one is available, but i forget the name and its quite ugly...
that looks good!! then again, the one on the right looks almost just as good for a fraction of the price. Other than OEM and Mugen, is there any other lips for the ap2 available?</TD></TR></TABLE>
one other one is available, but i forget the name and its quite ugly...
Trending Topics
* B A N N E D *
Joined: Oct 2004
Posts: 8,291
Likes: 0
From: Orange County, CA, USA
Re: (*****ieboy)
A friend recently bought one, the fiberglass quality didn't really impress me. Also, it took us a while to fit it properly to get a stock-like gap. Yes, its the real deal J's. Too much hype.
Honda-Tech Member
Joined: Jan 2005
Posts: 5,997
Likes: 0
From: never never land
Re: (Slideways2000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Slideways2000 »</TD></TR><TR><TD CLASS="quote">A friend recently bought one, the fiberglass quality didn't really impress me. Also, it took us a while to fit it properly to get a stock-like gap. Yes, its the real deal J's. Too much hype.</TD></TR></TABLE>
its a bulky kit and alot of people do not realize this...your ground clearence is lowered quit a bit, its an extreme kit for a daily driven s2000...
its a bulky kit and alot of people do not realize this...your ground clearence is lowered quit a bit, its an extreme kit for a daily driven s2000...
Honda-Tech Member
Joined: Jan 2005
Posts: 5,997
Likes: 0
From: never never land
Re: (Slideways2000)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Slideways2000 »</TD></TR><TR><TD CLASS="quote">I wasn't even concerned about that, it's just that it took forever to get it to fit close to OEM, gap wise.</TD></TR></TABLE>
i hear the amuse bumper also needs some tweaking to fit right...
im wondering how the spoon is because ill be ordering that soon.
i hear the amuse bumper also needs some tweaking to fit right...
im wondering how the spoon is because ill be ordering that soon.
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 294
Likes: 0
From: Thornton, CO, US
Re: (Francesco)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Francesco »</TD></TR><TR><TD CLASS="quote">
i hear the amuse bumper also needs some tweaking to fit right...
im wondering how the spoon is because ill be ordering that soon.</TD></TR></TABLE>
Let us know... i'm between those two, spoon or j's. I just think that the spoon rear is a bit too extreme.
i hear the amuse bumper also needs some tweaking to fit right...
im wondering how the spoon is because ill be ordering that soon.</TD></TR></TABLE>
Let us know... i'm between those two, spoon or j's. I just think that the spoon rear is a bit too extreme.
Honda-Tech Member
Joined: Apr 2005
Posts: 902
Likes: 0
From: irvine, socal
Re: (s2kc's)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s2kc’s »</TD></TR><TR><TD CLASS="quote">Anyone know about the fitment of this kit? Any pictures of a silverstone with it?
Thanks in advance!! </TD></TR></TABLE>
of all the fitments of the different s2000 kits, the j's has always been good as is the amuse and spoon. there can always be an inconsistency in a build though....ings has actually been the best fitment from what i've seen consistently across all cars.
Thanks in advance!! </TD></TR></TABLE>
of all the fitments of the different s2000 kits, the j's has always been good as is the amuse and spoon. there can always be an inconsistency in a build though....ings has actually been the best fitment from what i've seen consistently across all cars.
Honda-Tech Member
Joined: Jan 2005
Posts: 5,997
Likes: 0
From: never never land
Re: (s2kc's)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by s2kc’s »</TD></TR><TR><TD CLASS="quote">
Let us know... i'm between those two, spoon or j's. I just think that the spoon rear is a bit too extreme.</TD></TR></TABLE>
spoon rear, who needs it
bys wing and topsecret rear diffusor is all i need
Let us know... i'm between those two, spoon or j's. I just think that the spoon rear is a bit too extreme.</TD></TR></TABLE>
spoon rear, who needs it
bys wing and topsecret rear diffusor is all i need
* B A N N E D *
Joined: Oct 2004
Posts: 8,291
Likes: 0
From: Orange County, CA, USA
Re: (silver j)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by silver j »</TD></TR><TR><TD CLASS="quote">
of all the fitments of the different s2000 kits, the j's has always been good as is the amuse and spoon. there can always be an inconsistency in a build though....ings has actually been the best fitment from what i've seen consistently across all cars.</TD></TR></TABLE>
The INGS+ HFRP fits well because it's flexible. As far as fitment goes, I give ASM, Varis, Cwest a, even with hard to fit parts like CF panels.
of all the fitments of the different s2000 kits, the j's has always been good as is the amuse and spoon. there can always be an inconsistency in a build though....ings has actually been the best fitment from what i've seen consistently across all cars.</TD></TR></TABLE>
The INGS+ HFRP fits well because it's flexible. As far as fitment goes, I give ASM, Varis, Cwest a
, even with hard to fit parts like CF panels.
Thread Starter
Junior Member
Joined: Jan 2005
Posts: 294
Likes: 0
From: Thornton, CO, US
Re: (Francesco)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Francesco »</TD></TR><TR><TD CLASS="quote">
spoon rear, who needs it
bys wing and topsecret rear diffusor is all i need </TD></TR></TABLE>
that should look nice. post pics as soon as it happens
spoon rear, who needs it
bys wing and topsecret rear diffusor is all i need
</TD></TR></TABLE>that should look nice. post pics as soon as it happens
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: (Blanket Jackson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blanket Jackson »</TD></TR><TR><TD CLASS="quote">Wow. Looks like great fitment on that SSM S2K.</TD></TR></TABLE>
Thats a manufacturer's picture, I would hope the fitment would be great.
Thats a manufacturer's picture, I would hope the fitment would be great.
Honda-Tech Member
Joined: Jan 2005
Posts: 5,997
Likes: 0
From: never never land
Re: (NAallTheWAY)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAallTheWAY »</TD></TR><TR><TD CLASS="quote">
Thats a manufacturer's picture, I would hope the fitment would be great.</TD></TR></TABLE>
yeah, they all look great untill you try to put a kit on...
Thats a manufacturer's picture, I would hope the fitment would be great.</TD></TR></TABLE>
yeah, they all look great untill you try to put a kit on...
Honda-Tech Member
Joined: May 2004
Posts: 1,127
Likes: 0
From: Nor Cal, US
Re: ? about J's racing type s body kit (s2kc's)
i just got a j's front a few month ago. anyways, fitment wasnt that great. so parts of the bumper had to be trimmed off under both headlights. also, the part where the bumper meets the fender was off too.
My boy just got his full spoon front clip...well, a hood and a front. fitment is really good. only minor mods had to be done.
My boy just got his full spoon front clip...well, a hood and a front. fitment is really good. only minor mods had to be done.
