Hey Everyone,

I have a Brand New set of Front and Rear Ingalls Camber Kit for a 2003-2005 Civic SI EP3. They will fit other vehicles too so please check on Ingalls website for other applications.

If you have any questions at all, please feel free to contact me at anytime. Here is a link to my vouch page: https://honda-tech.com/zerothread?id=941851

Email: henry@full-race.com
AIM: Full Race Henry

From their website:

Front:

Replace both strut to spindle mounting bolts to achieve up to ±2°.

Note: For positive camber adjustment, rotate the upper FastcamTM arrow towards the tire and the lower FastcamTM arrow towards the engine. For negative camber adjustment, rotate the upper FastcamTM arrow towards the engine and the lower FastcamTM arrow towards the tire.
CAUTION: Observe proper safety and repair procedures for installation of all chassis parts. Some chassis parts require specialized tools and experience and therefore MUST be installed by a qualified technician otherwise an unsafe vehicle and / or personal injury could result.
NOTE: These parts are intended for use in vehicles with abnormal alignment and are designed to replace the non-adjustable factory equipment. These parts are not designed for installation on vehicles with suspension and/or steering systems modified for racing, competition or any other non-standard purpose.


MSRP: $86.68
Selling: $50 OR BEST OFFER
OR $160 FOR BOTH




Rear:

Rear Camber Adjuster
Adjustment Range: -4° to +7°


MSRP: $265.38
Selling: $150 OR BEST OFFER
Or $160 FOR BOTH