FS: 1997 Turbo/Built Prelude (Kentucky)
Selling my 1997 Turbo Prelude i just recently finished. Info. is as follows:
Engine
-1998 Block (bigger mains 55mm)
-Darton Sleeves (Closed Deck)
-Stock 87mm bore
-Wiseco Forged pistons 87mm (Coated)
-Wiseco Rings
-Crower Forged Rods
-Polished Crank
-Cometic Head Gasket
Head
-NEW 3 angle valve job
-NEW Port and Polished
-NEW Manly Full Valve Train 1mm oversized (Valves, Retainers, Dual Springs)
-NEW Rew rocker assembly (Stock honda rockers)
-Stock cams (Due to 1mm oversized valves)
-AEM Cam Gears
-NEW Crank Balancer
Transmission
-Rebuilt at 30,xxx miles
-NEW ACT Prolite Flywheel
-NEW ACT Street and Strip disc
-NEW ACT Heavy Duty Pressure Plate
Suspension
-NEW Skunk 2 Coilovers
-NEW Tokico 5 way adjustable struts
-DC Strut Bar
-NEW Ball Joint Camber kit
Fuel System
-(4) Precision 1000cc injectors
-Plus (2) additional stock injectors
-Hondata S200B
-Hondata Datalogging
-P28 OBD1 ECU
-AEM Fuel Rail
-AEM Fuel Pressure Regulator
-HKS EVC (Electronic Valve Controller)
-Walbro 255 Fuel Pump
-Resistor Box
Turbo Kit
-Turbonetics FMAX Kit w/ all chrome piping
Upgraded t3/t4e .57 trim .63 A/R w/ stage 3 compressor wheel (rebuilt 50 miles ago)
-Spearco Intercooler
-3 Bar MAP injector controller
-Revhard manifold
-Tial 38mm High Pressure Wastegate w/ 13 lb spring
-2.5" Custom Downpipe
-HKS bov
Gauges
Auto Meter Sport Comp.:
-Boost Gauge
-Fuel Pressure
-A/F Guauge
-Volts
-Water Temp.
Body
-Black Widow Front end (not on car)
-Black Widow Side Skirts
-Wings West rear bumper
-Black Widow Rear end (not on car, brand new)
-Shaved Trunk lid and painted
-Also all Stock body pieces included
Exhaust
-2.5" Downpipe
-3" Testpipe
-3" Exhaust with N1 Muffler
Misc.
-H23 Manual Tensioner (Converted)
-Momo Boot
-Momo Carbon Fiber ****
-Battery relocated to trunk with custom Taylor aluminum box.
-NEW Water pump
-Custom Red/Clear Tail Lights
-4 new Kuhmo tires
-Vitek wires
-NEW altenator
-NEW distributor
More pics upon request, Car is tuned at 13psi right now and pulls great. Never have dynoed it or been to track on this setup. Car will prob. receive another retune before sale. Most of these parts have less then 1200 miles on them and all internal engine components have less then 1300 miles. Car itself has 75,xxx on body and flawless interior. Car has only seen boost a few times. Car has always been garage kept. Autolab did the labor on the car as well my machine shop. Parts are subject to change being I might have forgotten some. I must sell this car in need of college funds. There is nothing wrong with the car and was built for big power in mind.
Serious offfers only no bitching about price if you dont want dont post!
Asking $16,000 o.b.o.
Pics:
Engine
-1998 Block (bigger mains 55mm)
-Darton Sleeves (Closed Deck)
-Stock 87mm bore
-Wiseco Forged pistons 87mm (Coated)
-Wiseco Rings
-Crower Forged Rods
-Polished Crank
-Cometic Head Gasket
Head
-NEW 3 angle valve job
-NEW Port and Polished
-NEW Manly Full Valve Train 1mm oversized (Valves, Retainers, Dual Springs)
-NEW Rew rocker assembly (Stock honda rockers)
-Stock cams (Due to 1mm oversized valves)
-AEM Cam Gears
-NEW Crank Balancer
Transmission
-Rebuilt at 30,xxx miles
-NEW ACT Prolite Flywheel
-NEW ACT Street and Strip disc
-NEW ACT Heavy Duty Pressure Plate
Suspension
-NEW Skunk 2 Coilovers
-NEW Tokico 5 way adjustable struts
-DC Strut Bar
-NEW Ball Joint Camber kit
Fuel System
-(4) Precision 1000cc injectors
-Plus (2) additional stock injectors
-Hondata S200B
-Hondata Datalogging
-P28 OBD1 ECU
-AEM Fuel Rail
-AEM Fuel Pressure Regulator
-HKS EVC (Electronic Valve Controller)
-Walbro 255 Fuel Pump
-Resistor Box
Turbo Kit
-Turbonetics FMAX Kit w/ all chrome piping
Upgraded t3/t4e .57 trim .63 A/R w/ stage 3 compressor wheel (rebuilt 50 miles ago)
-Spearco Intercooler
-3 Bar MAP injector controller
-Revhard manifold
-Tial 38mm High Pressure Wastegate w/ 13 lb spring
-2.5" Custom Downpipe
-HKS bov
Gauges
Auto Meter Sport Comp.:
-Boost Gauge
-Fuel Pressure
-A/F Guauge
-Volts
-Water Temp.
Body
-Black Widow Front end (not on car)
-Black Widow Side Skirts
-Wings West rear bumper
-Black Widow Rear end (not on car, brand new)
-Shaved Trunk lid and painted
-Also all Stock body pieces included
Exhaust
-2.5" Downpipe
-3" Testpipe
-3" Exhaust with N1 Muffler
Misc.
-H23 Manual Tensioner (Converted)
-Momo Boot
-Momo Carbon Fiber ****
-Battery relocated to trunk with custom Taylor aluminum box.
-NEW Water pump
-Custom Red/Clear Tail Lights
-4 new Kuhmo tires
-Vitek wires
-NEW altenator
-NEW distributor
More pics upon request, Car is tuned at 13psi right now and pulls great. Never have dynoed it or been to track on this setup. Car will prob. receive another retune before sale. Most of these parts have less then 1200 miles on them and all internal engine components have less then 1300 miles. Car itself has 75,xxx on body and flawless interior. Car has only seen boost a few times. Car has always been garage kept. Autolab did the labor on the car as well my machine shop. Parts are subject to change being I might have forgotten some. I must sell this car in need of college funds. There is nothing wrong with the car and was built for big power in mind.
Serious offfers only no bitching about price if you dont want dont post!
Asking $16,000 o.b.o.
Pics:
Thread
Thread Starter
Forum
Replies
Last Post




