Us. b16 in too a 88crx

Reply Subscribe

Thread Tools

Search this Thread

Jan 13, 2006 | 03:58 PM

jamesknightsi

Thread Starter

Joined: Dec 2005

Posts: 16

Likes: 0

From: Wilmington, nc, USA

Us. b16 in too a 88crx

Trying to figure out wether i have to use 93 integra mid shaft and axles or can i use the ones directly off of the 99 Si, and if i cant what would be best to get the drive train and what not settled.
james

Jan 13, 2006 | 04:05 PM

0554

Honda-Tech Member

Joined: Sep 2002

Posts: 2,408

Likes: 0

From: usa

Re: Us. b16 in too a 88crx (jamesknightsi)

you can use either or. just make sure you have the right midshaft. also make sure the tranni axle seals are for whatever axles you plan to use.

Jan 13, 2006 | 07:43 PM

jamesknightsi

Thread Starter

Joined: Dec 2005

Posts: 16

Likes: 0

From: Wilmington, nc, USA

OK so ur saying if i use the 99si axles use the 99si midshaft and all that will drop right intothe 88 crx.

Jan 13, 2006 | 07:50 PM

0554

Honda-Tech Member

Joined: Sep 2002

Posts: 2,408

Likes: 0

From: usa

Re: (jamesknightsi)

yes unless its an hf. then you have to change the front spindles. cause the hf axle holes are smaller.

Jan 14, 2006 | 10:21 PM

jamesknightsi

Thread Starter

Joined: Dec 2005

Posts: 16

Likes: 0

From: Wilmington, nc, USA

Re: (0554)

DAMNIT. life sucks. ok ok got another one. will the spindals directly off the si fit. cause iwas also going to swap brakes......

Jan 15, 2006 | 12:17 AM

0554

Honda-Tech Member

Joined: Sep 2002

Posts: 2,408

Likes: 0

From: usa

yes the si knuckes will fit.

Jan 15, 2006 | 08:31 AM

hotboxedcrx

Joined: Aug 2005

Posts: 87

Likes: 0

From: Niagara Falls, Canada

Re: (0554)

Once you get your axles... I'd suggest test fitting them in the half shaft and knuckles before you get too far into the job and find out you hve the wrong ones.

Us. b16 in too a 88crx

Us. b16 in too a 88crx

Trending Topics