***PARTING OUT B16 TURBO **** DRAG * PRECISION * HONDATA * RC * Clutch Masters
Here we go again.... Another car is being parted out.
All prices do not include shipping.
Everything I have is meticulously kept clean and in good condition unless otherwise noted.
If you have any questions you can email me at xricexrcrx@aol.com
I am located in Gardena if any of you can drive over here and am willing to drive halfway to meet you if its reasonable.
LOOKING TO TRADE FOR OBDI P75 ECU 5SPD
Thanks for looking!
<U>B16A Longblock</U>
- From canada
- Complete with all sensors, dist, wires, injectors
- Comes with Skunk intake manifold- No TB
- Willing to separate head and block or any misc parts.
- Head should get #1 valve/seal replaced but was driving fine w/ turbo no problems.
PRICE: SOLD

<U>Drag Gen III Turbo Kit for B Series</U>
- Upgraded Precision SC50 good up to 450hp $800 if bought individually
- Tial Wastegate/ Blitz BOV
- Less than 5k Miles.... Serioulsy
- Entire kit is in prestine condition
- No FMU
- Put down 297WHP @ 10 lbs @ only 7000Rpm with STOCK b16 above
PRICE: $1650 OBO



<U> P30 ECU with Hondata S200 BOOST OPTION</U>
- Comes tuned map for stock b16 with drag kit above-Church Automotive
PRICE: $410 OBO

<U>Clutch Masters Stage 3 Clucth</U>
- For B Series tranny
- USED FOR LESS THAN 1500 MILES... DO NOT QUESTION THIS!
- PERFECT CONDITION
PRICE: SOLD TO swatteamtimmah ~ SHIPPED OUT~ THANKS!

<U>Jun Flywheel</U>
- 8.5 lbs
- Recently resurfaced when clucth install <1500 Miles
PRICE: $250 OBO


<U>Apexi World Sport Muffler</U>
- Used for 1 year.. came off of EG6
- PERFECT CONDTION
PRICE: SOLD



<U>RC 440 Injectors</U>
- Comes with washers
- THEY WORK
PRICE: SOLD to xyzalvarez

<U>3" Mandrel Bent Piping with 3" Dynomax Muffler</U>
- fits 92-95 EG coupe
- comes with flex pipe
- straight through muffler
- used with turbo setup.... ****** loud!
- I am not shipping this thing
PRICE: $125


<U>Spoon Radiator Cap</U>
- Adds 15 Show points to JDM Showoff 2006 Championships
- Missing Spoon label..... Minus 15 Points. Sorry
PRICE: $19 OBO


<U>OEM Honda used Parts</U>
- JDM GSR cams- SOLD to ChadB
- stock clutch- $45 OBO
- B series header- $25 OBO
- 94-97 DC2 Healights- $25 OBO




I WILL BE ADDING MORE STUFF TONIGHT.... JUST RAN OUT OF TIME...THANKS AGAIN FOR LOOKING AND DON'T FORGET TO BUMP THIS!!!
Modified by scLSteg at 8:01 PM 1/9/2006
Modified by scLSteg at 5:26 PM 1/10/2006
Modified by scLSteg at 8:01 PM 1/10/2006
Modified by scLSteg at 9:51 PM 1/11/2006
Modified by scLSteg at 7:41 PM 1/12/2006
Modified by scLSteg at 10:32 PM 1/12/2006
Modified by scLSteg at 1:07 AM 1/14/2006
All prices do not include shipping.
Everything I have is meticulously kept clean and in good condition unless otherwise noted.
If you have any questions you can email me at xricexrcrx@aol.com
I am located in Gardena if any of you can drive over here and am willing to drive halfway to meet you if its reasonable.
LOOKING TO TRADE FOR OBDI P75 ECU 5SPD
Thanks for looking!
<U>B16A Longblock</U>
- From canada
- Complete with all sensors, dist, wires, injectors
- Comes with Skunk intake manifold- No TB
- Willing to separate head and block or any misc parts.
- Head should get #1 valve/seal replaced but was driving fine w/ turbo no problems.
PRICE: SOLD

<U>Drag Gen III Turbo Kit for B Series</U>
- Upgraded Precision SC50 good up to 450hp $800 if bought individually
- Tial Wastegate/ Blitz BOV
- Less than 5k Miles.... Serioulsy
- Entire kit is in prestine condition
- No FMU
- Put down 297WHP @ 10 lbs @ only 7000Rpm with STOCK b16 above
PRICE: $1650 OBO



<U> P30 ECU with Hondata S200 BOOST OPTION</U>
- Comes tuned map for stock b16 with drag kit above-Church Automotive

PRICE: $410 OBO

<U>Clutch Masters Stage 3 Clucth</U>
- For B Series tranny
- USED FOR LESS THAN 1500 MILES... DO NOT QUESTION THIS!
- PERFECT CONDITION
PRICE: SOLD TO swatteamtimmah ~ SHIPPED OUT~ THANKS!

<U>Jun Flywheel</U>
- 8.5 lbs
- Recently resurfaced when clucth install <1500 Miles
PRICE: $250 OBO


<U>Apexi World Sport Muffler</U>
- Used for 1 year.. came off of EG6
- PERFECT CONDTION
PRICE: SOLD



<U>RC 440 Injectors</U>
- Comes with washers
- THEY WORK
PRICE: SOLD to xyzalvarez

<U>3" Mandrel Bent Piping with 3" Dynomax Muffler</U>
- fits 92-95 EG coupe
- comes with flex pipe
- straight through muffler
- used with turbo setup.... ****** loud!
- I am not shipping this thing
PRICE: $125


<U>Spoon Radiator Cap</U>
- Adds 15 Show points to JDM Showoff 2006 Championships
- Missing Spoon label..... Minus 15 Points. Sorry
PRICE: $19 OBO


<U>OEM Honda used Parts</U>
- JDM GSR cams- SOLD to ChadB
- stock clutch- $45 OBO
- B series header- $25 OBO
- 94-97 DC2 Healights- $25 OBO




I WILL BE ADDING MORE STUFF TONIGHT.... JUST RAN OUT OF TIME...THANKS AGAIN FOR LOOKING AND DON'T FORGET TO BUMP THIS!!!
Modified by scLSteg at 8:01 PM 1/9/2006
Modified by scLSteg at 5:26 PM 1/10/2006
Modified by scLSteg at 8:01 PM 1/10/2006
Modified by scLSteg at 9:51 PM 1/11/2006
Modified by scLSteg at 7:41 PM 1/12/2006
Modified by scLSteg at 10:32 PM 1/12/2006
Modified by scLSteg at 1:07 AM 1/14/2006
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by lopaka07 »</TD></TR><TR><TD CLASS="quote">another pm</TD></TR></TABLE>
Another reply...
Another reply...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 2KTURBOcIVIC »</TD></TR><TR><TD CLASS="quote">sorry guys kit is sold to me! sendin out paypal when my bro gets home</TD></TR></TABLE>
payment was suppose to be sent last night.......kit is still up for grabs.... unless paid for in full.... if no payment is received tonight, the ecu/hondata may be sold to another HT member
payment was suppose to be sent last night.......kit is still up for grabs.... unless paid for in full.... if no payment is received tonight, the ecu/hondata may be sold to another HT member
Thread
Thread Starter
Forum
Replies
Last Post
scLSteg
Southern California (Sales)
33
Jan 15, 2006 05:05 PM
*** PARTING EVERYTHING!! SO MUCH SHIET AND INSANELY CHEAP*** B16 Longblock * Jun * Drag Turbo * RC *
scLSteg
For Sale
35
Jan 15, 2006 05:04 PM
jEE
Classifieds: Forced Induction
8
Jul 27, 2004 02:53 PM





