Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside
Thread Starter
Joined: Jan 2005
Posts: 31
Likes: 0
From: singapore
Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside
Engine was built 2 years ago, currently undergoing further upgrades.
http://www.youtube.com/w/?v=lQt2mAX88l8
The EG6 is running a 89mm crank(apologies, video quality is quite blur).
The EK9 is running a 95mm crank(listen closely, it sounds like an F1).
Modified by EdgarJD at 5:21 PM 1/24/2006
http://www.youtube.com/w/?v=lQt2mAX88l8
The EG6 is running a 89mm crank(apologies, video quality is quite blur).
The EK9 is running a 95mm crank(listen closely, it sounds like an F1).
Modified by EdgarJD at 5:21 PM 1/24/2006
Junior Member
Joined: Mar 2005
Posts: 982
Likes: 0
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (Phatch99)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phatch99 »</TD></TR><TR><TD CLASS="quote">what the hell is in that ek9? sounds badass!!!! 
clean eg btw. 
</TD></TR></TABLE>
WORD that sounds soooo bad *** bro!!!
clean eg btw. </TD></TR></TABLE>WORD that sounds soooo bad *** bro!!!
Trending Topics
Thread Starter
Joined: Jan 2005
Posts: 31
Likes: 0
From: singapore
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (itralex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by itralex »</TD></TR><TR><TD CLASS="quote">the Ek sounded sick, any info on the setup besides the crank?</TD></TR></TABLE>
The EK sounded sick cos he ran out of gear and was revving to ard 9500rpm(that's what he claimed
).He is using a customised intake manifold(meant for evo) :
The EK sounded sick cos he ran out of gear and was revving to ard 9500rpm(that's what he claimed
).He is using a customised intake manifold(meant for evo) :
Thread Starter
Joined: Jan 2005
Posts: 31
Likes: 0
From: singapore
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (ALLMOTOR18)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ALLMOTOR18 »</TD></TR><TR><TD CLASS="quote">Nice video..
what ETs do these cars run at track?</TD></TR></TABLE>
low 12s for street cars, high 11s for offroad cars.
what ETs do these cars run at track?</TD></TR></TABLE>
low 12s for street cars, high 11s for offroad cars.
Thread Starter
Joined: Jan 2005
Posts: 31
Likes: 0
From: singapore
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (ninefivehatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ninefivehatch »</TD></TR><TR><TD CLASS="quote">WOW. more info on the ek9 setup?</TD></TR></TABLE>
sorry dude, don't have much info except that it's a 2.1 litre, 95mm crank, customised intake manifold and stock tranny with a 4.4 fd.
Modified by EdgarJD at 11:09 AM 1/7/2006
sorry dude, don't have much info except that it's a 2.1 litre, 95mm crank, customised intake manifold and stock tranny with a 4.4 fd.
Modified by EdgarJD at 11:09 AM 1/7/2006
Honda-Tech Member
Joined: Jul 2003
Posts: 1,838
Likes: 0
From: western, PA
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (EdgarJD)
hmmm The manifold looks ok but i fail to see the reasoning behind using it??
Did he have it laying around or something??
Did he have it laying around or something??
Thread Starter
Joined: Jan 2005
Posts: 31
Likes: 0
From: singapore
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (Used2beAb16)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Used2beAb16 »</TD></TR><TR><TD CLASS="quote">hmmm The manifold looks ok but i fail to see the reasoning behind using it??
Did he have it laying around or something?? </TD></TR></TABLE>
They seemed to have made more power than itbs.No, they customised quite a lot of these manifold coz they are high in demand.Just listen to the sound it makes in the video and you will know why they want this manifold.
Did he have it laying around or something?? </TD></TR></TABLE>
They seemed to have made more power than itbs.No, they customised quite a lot of these manifold coz they are high in demand.Just listen to the sound it makes in the video and you will know why they want this manifold.
Junior Member
Joined: May 2003
Posts: 582
Likes: 0
From: portland, or, USA
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (EdgarJD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EdgarJD »</TD></TR><TR><TD CLASS="quote">
They seemed to have made more power than itbs.No, they customised quite a lot of these manifold coz they are high in demand.Just listen to the sound it makes in the video and you will know why they want this manifold.
</TD></TR></TABLE>
now that my friends...is a BAD *** MANIFOLD!!!...any ideas where i can get one...maybe for an h22...and how much it costs.
They seemed to have made more power than itbs.No, they customised quite a lot of these manifold coz they are high in demand.Just listen to the sound it makes in the video and you will know why they want this manifold.
</TD></TR></TABLE>now that my friends...is a BAD *** MANIFOLD!!!...any ideas where i can get one...maybe for an h22...and how much it costs.
Junior Member
Joined: Mar 2005
Posts: 982
Likes: 0
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (zer0-psi)
i believe it is made by a company called Magnus Motorsports in canada. I looked on their website and it said they can make custom apps.
Joined: Nov 2004
Posts: 152
Likes: 0
From: O.G. North, TX., Dallas
Re: Street Drag EG6 Project> 230WHP, 2L, All Motor > Short Video inside (EdgarJD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EdgarJD »</TD></TR><TR><TD CLASS="quote">
They seemed to have made more power than itbs.No, they customised quite a lot of these manifold coz they are high in demand.Just listen to the sound it makes in the video and you will know why they want this manifold.
</TD></TR></TABLE>
this is something to look into, plus the tb.
They seemed to have made more power than itbs.No, they customised quite a lot of these manifold coz they are high in demand.Just listen to the sound it makes in the video and you will know why they want this manifold.
</TD></TR></TABLE> this is something to look into, plus the tb.
Thread
Thread Starter
Forum
Replies
Last Post
X-Mazda 3 Racer
All Motor / Naturally Aspirated
12
Aug 7, 2005 11:58 AM
