boring & measuring... how much should I pay?
Thread Starter
Honda-Tech Member
Joined: Jun 2002
Posts: 3,116
Likes: 2
boring & measuring... how much should I pay?
On a a D16A6 block, if I wanted a shop to:
-bore .25mm
-hone and measure the cylinders
-measure for all the bearings
how much should I expect to pay?
-bore .25mm
-hone and measure the cylinders
-measure for all the bearings
how much should I expect to pay?
Member
Joined: Feb 2002
Posts: 5,962
Likes: 0
From: at the track
Re: boring & measuring... how much should I pay? (fireant)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fireant »</TD></TR><TR><TD CLASS="quote">On a a D16A6 block, if I wanted a shop to:
-bore .25mm
-hone and measure the cylinders
-measure for all the bearings
how much should I expect to pay?</TD></TR></TABLE>
My machinist would probably charge $40 per cylinder for boring and $20 per cylinder for honing.
The measuring thing is tricky. You got to find a machinist you can trust 100% or find one that will let you be there when he measures.
-bore .25mm
-hone and measure the cylinders
-measure for all the bearings
how much should I expect to pay?</TD></TR></TABLE>
My machinist would probably charge $40 per cylinder for boring and $20 per cylinder for honing.
The measuring thing is tricky. You got to find a machinist you can trust 100% or find one that will let you be there when he measures.
Thread
Thread Starter
Forum
Replies
Last Post
SiR Inspired ED7
All Motor / Naturally Aspirated
4
Sep 20, 2007 08:42 PM
Leo.
Forced Induction
4
Dec 8, 2006 02:56 PM