FS: honda/acura stuff
Thread Starter
Honda-Tech Member
Joined: May 2005
Posts: 275
Likes: 0
From: g unit, nc, united states
<U>prices are W/O shipping</U>
(Non-Negotiable)
(3x) 90-91 (PR4) Integra 5 speed ECU's........................................$50 each
(prices on most items below are moderately negotiable, some more than others)
D16A1 (1st gen teg, DOHC) complete head.....................................$35
D16A1 port/polish head w/ valves and springs only..........................$75
D16A1 pistons/rods/bearings (nice upgrade from 88-91 sohc parts)...$50
complete d16a1 motor (will fit in Pre-1988 civic/crx/integras)......$make offer
(2x) D16A1 bare Intake Manifolds (MPFI) works with OBD0 d series (one with fuel pressure regulator/rail)............................................. ......................$20 each
(3x) DOHC ZC cams (stock profile) will fit in D16A1 head..................$50 each
DOHC ZC head (disassembled, can assemble upon request w/cams)..$70
(2x) DOHC ZC valve cover w/ valve cover gaskets, 1polish, 1black....$20 each
DOHC ZC distributor w/ crank angle sensor......................................$75
Stock D series headers off a 90 civic dx............................................$5
AC compressor off of a 90 civic dx (needs to be recharged i think)......$15
95% complete AC off a 90 civic dx, plumbing, compressor, etc............$30
stock shifter (only) from a 90 civic base model (4 speed manual).........$5
D series alternator (off of 90 civic dx) used for a month......................$90
I am mostly looking for cash, trying to complete a motor swap, but i am open to trades. items i will take for trade are below:
DOHC ZC block
DOHC ZC crank pulley
89 integra gasket set (new in box, unopened)
88-91 civic/crx si/hf/ex distributor
88-91 civic/crx si/ex intake manifold
NEW ZC or VW Golf/Jetta 1.8L & 2L 16V head bolts
B series into 90 civic hatch swap parts
b18a1
b series cable tranny
also interested in aftermarket parts
(Non-Negotiable)
(3x) 90-91 (PR4) Integra 5 speed ECU's........................................$50 each
(prices on most items below are moderately negotiable, some more than others)
D16A1 (1st gen teg, DOHC) complete head.....................................$35
D16A1 port/polish head w/ valves and springs only..........................$75
D16A1 pistons/rods/bearings (nice upgrade from 88-91 sohc parts)...$50
complete d16a1 motor (will fit in Pre-1988 civic/crx/integras)......$make offer
(2x) D16A1 bare Intake Manifolds (MPFI) works with OBD0 d series (one with fuel pressure regulator/rail)............................................. ......................$20 each
(3x) DOHC ZC cams (stock profile) will fit in D16A1 head..................$50 each
DOHC ZC head (disassembled, can assemble upon request w/cams)..$70
(2x) DOHC ZC valve cover w/ valve cover gaskets, 1polish, 1black....$20 each
DOHC ZC distributor w/ crank angle sensor......................................$75
Stock D series headers off a 90 civic dx............................................$5
AC compressor off of a 90 civic dx (needs to be recharged i think)......$15
95% complete AC off a 90 civic dx, plumbing, compressor, etc............$30
stock shifter (only) from a 90 civic base model (4 speed manual).........$5
D series alternator (off of 90 civic dx) used for a month......................$90
I am mostly looking for cash, trying to complete a motor swap, but i am open to trades. items i will take for trade are below:
DOHC ZC block
DOHC ZC crank pulley
89 integra gasket set (new in box, unopened)
88-91 civic/crx si/hf/ex distributor
88-91 civic/crx si/ex intake manifold
NEW ZC or VW Golf/Jetta 1.8L & 2L 16V head bolts
B series into 90 civic hatch swap parts
b18a1
b series cable tranny
also interested in aftermarket parts


