***FS: B serie T3 Stainless steel manifold WITH 3inch downpipe! CHEAP
Thread Starter
Honda-Tech Member
iTrader: (1)
Joined: Mar 2003
Posts: 3,662
Likes: 0
From: Louisville, KY, USA
***FS: B series T3 Stainless steel manifold WITH 3inch downpipe! CHEAP, MaKe OFFER!
used ERL Stainless Steel Turbo manifold and 3 inch downpipe. Used for 12,500 miles. Selling because I have to move on in life with college.
The downpipe does have a welded o2 bung in the OEM factory location.
Manifold is for any B series Honda engine ( B20, B16, B18A/B/C )
This is A/C and Powersteering Friendly with the included downpipe. The downpipe is a standard 4 bolt exhaust turbo flange made of stainless steel as well as the downpipe is made of stainless steel. It is 2.5 inch flared to 3inch to accomodate the A/C compressor. Flows great. I ran open downpipe the entire time it was on the car and had no problems with it.
Manifold is flanged for a 35-38mm TiaL Wastegate. Manifold is flanged for a T3 turbo flange. Will work with a T3-t04e and t3-t04b turbo's. You May have to notch/grind on the block casting some depending on the turbo. Manifold spools and looks Great! Here are some Specs for the manifold from the manufacturers website, http://WWW.ERLPERFORMANCE.COM:
"These premium stainless steel manifolds will withstand heating to 1800 F followed by a total submersion in water with no cracking or flaking. These electro-polished manifolds are beautiful inside and out, but the real beauty is in the free flow design with adjustable waste gate mounting and standard T03 turbo mounting flange."
Manifold sells for $450.00 dollars new and the downpipe was $235.00
Sorry for the dirty low quality pics.
Feel free to ask me any more questions @ iiib20vtecwade@insightbb.com
Will ship to the lower 48 states only, thank you.
Make reasonable offer!
The downpipe does have a welded o2 bung in the OEM factory location.
Manifold is for any B series Honda engine ( B20, B16, B18A/B/C )
This is A/C and Powersteering Friendly with the included downpipe. The downpipe is a standard 4 bolt exhaust turbo flange made of stainless steel as well as the downpipe is made of stainless steel. It is 2.5 inch flared to 3inch to accomodate the A/C compressor. Flows great. I ran open downpipe the entire time it was on the car and had no problems with it.
Manifold is flanged for a 35-38mm TiaL Wastegate. Manifold is flanged for a T3 turbo flange. Will work with a T3-t04e and t3-t04b turbo's. You May have to notch/grind on the block casting some depending on the turbo. Manifold spools and looks Great! Here are some Specs for the manifold from the manufacturers website, http://WWW.ERLPERFORMANCE.COM:
"These premium stainless steel manifolds will withstand heating to 1800 F followed by a total submersion in water with no cracking or flaking. These electro-polished manifolds are beautiful inside and out, but the real beauty is in the free flow design with adjustable waste gate mounting and standard T03 turbo mounting flange."
Manifold sells for $450.00 dollars new and the downpipe was $235.00
Sorry for the dirty low quality pics.
Feel free to ask me any more questions @ iiib20vtecwade@insightbb.com
Will ship to the lower 48 states only, thank you.
Make reasonable offer!
Thread
Thread Starter
Forum
Replies
Last Post
BoostFlow.com
Forced Induction
122
Nov 2, 2011 10:00 PM
scspeed
Classifieds: Forced Induction
4
Feb 10, 2011 05:31 AM
99B16Si
Florida (Sales)
2
Nov 17, 2006 06:27 AM
kordenbrock motorsports
For Sale
12
Jan 14, 2006 01:56 PM
