ILLINOIS:FS/WTB/WTT: January 06 thread
Set of 4 BFGoodrich Traction T/A V tires. They are 205/55/R15's I'm looking to get $300 firm for them.
http://img.photobucket.com/alb...a.jpg
http://img.photobucket.com/alb...e.jpg
Set of 4 Kumho ECSTA Supra 712 tires. They are 205/50/R15's looking to get $300 obo for them.
http://img.photobucket.com/alb...4.jpg
Skunk2 B-series Vtec Valves New* $300 nothing less. no shipping. They have been opened and set in the head, but never fully installed.
USDM GSR Cams with Stock Cam Gears *make offer
B18a1 Block fresh from P.E.R. Race Engines
Stock Bore
Honed
Minty Fresh
The work done by P.E.R cost $120
So I want $150 for the Block
I have the complete motor besides the oil pan that I would sell it all for $200.
http://img.photobucket.com/alb...9.jpg
http://img.photobucket.com/alb...2.jpg
http://img.photobucket.com/alb...4.jpg
Modified by jsull. at 6:36 PM 12/31/2005
http://img.photobucket.com/alb...a.jpg
http://img.photobucket.com/alb...e.jpg
Set of 4 Kumho ECSTA Supra 712 tires. They are 205/50/R15's looking to get $300 obo for them.
http://img.photobucket.com/alb...4.jpg
Skunk2 B-series Vtec Valves New* $300 nothing less. no shipping. They have been opened and set in the head, but never fully installed.
USDM GSR Cams with Stock Cam Gears *make offer
B18a1 Block fresh from P.E.R. Race Engines
Stock Bore
Honed
Minty Fresh
The work done by P.E.R cost $120
So I want $150 for the Block
I have the complete motor besides the oil pan that I would sell it all for $200.
http://img.photobucket.com/alb...9.jpg
http://img.photobucket.com/alb...2.jpg
http://img.photobucket.com/alb...4.jpg
Modified by jsull. at 6:36 PM 12/31/2005
way to go brandon. first OT post. thats keepin it real right there. anyway, here's some first page ownage:
F.S. Car Audio:
jensen cd player, with remote, everything works fine, except the backlight.
Boss Ripper series 700 watt amplifier askin 100
1 12" polk audio subwoofer askin 50
2 12" Pyle blue wave 1200 watt subs. dvc. Askin 25 a piece
2 10” Kicker L5 subwoofers
1 dual 10” Kicker L5/L7 sub enclosure
Take the 10s, in the box and get a better deal
F.S. Car Interior Parts:
dash cluster housing (brown color)
brown ashtray
brown center console
2 shifter boots (std style)
ecu cover
1990 gauge cluster (no tach)
F.S. Other Car Parts:
d series axles (manual trans) about 120K on these babies
driver door great shape(gold paint, brown interior panel)
Stock d-series 88-91 exhaust manifold and downpipe
Stock d-series 92-95 exhaust manifold and downpipe
dohc ZC cam gear plastic cover (no screws)
thermostat, new in box
EF headlight fixtures, no turn signals.
ef tail lights, no center piece, has the wires and bulbs (1 set )
seized DOHC ZC block (spun bearing)
dohc zc head complete or in parts
dohc zc cam cover
dohc zc distributor
ZC throttle body
ZC ECU (real jdm ecu)
ZC intake manifold
ZC fuel rail and injectors
93 DX motor roughly 120k miles on it. Bought it from midwesta for 150. never installed since purchase, looking to get the same amount for it.
ZC transmission
EF front and rear strut tower braces
AEM short ram intake (red)
1991 Honda civic Hatchback (no motor no trans) click the following links for pics:
http://www.geocities.com/mr_cr...1.jpg
http://www.geocities.com/mr_cr...3.jpg
http://www.geocities.com/mr_cr...4.jpg
Off Topic F.s.
slim design PS2 that i bought but only used for like a week. its got an 8mb memory card, gran tursimo 4, tokyo extreme racer, and the game stop brand steering wheel and pedals. asking 150 for all of it. Will part out. Make offers.
This isn’t all of it, but it’s a big chunk of what I have. I’m going to have to walk through the garage and write down everything I have.
Modified by thapimpfromchi at 1:33 PM 12/31/2005
Modified by thapimpfromchi at 1:40 PM 12/31/2005
F.S. Car Audio:
jensen cd player, with remote, everything works fine, except the backlight.
Boss Ripper series 700 watt amplifier askin 100
1 12" polk audio subwoofer askin 50
2 12" Pyle blue wave 1200 watt subs. dvc. Askin 25 a piece
2 10” Kicker L5 subwoofers
1 dual 10” Kicker L5/L7 sub enclosure
Take the 10s, in the box and get a better deal
F.S. Car Interior Parts:
dash cluster housing (brown color)
brown ashtray
brown center console
2 shifter boots (std style)
ecu cover
1990 gauge cluster (no tach)
F.S. Other Car Parts:
d series axles (manual trans) about 120K on these babies
driver door great shape(gold paint, brown interior panel)
Stock d-series 88-91 exhaust manifold and downpipe
Stock d-series 92-95 exhaust manifold and downpipe
dohc ZC cam gear plastic cover (no screws)
thermostat, new in box
EF headlight fixtures, no turn signals.
ef tail lights, no center piece, has the wires and bulbs (1 set )
seized DOHC ZC block (spun bearing)
dohc zc head complete or in parts
dohc zc cam cover
dohc zc distributor
ZC throttle body
ZC ECU (real jdm ecu)
ZC intake manifold
ZC fuel rail and injectors
93 DX motor roughly 120k miles on it. Bought it from midwesta for 150. never installed since purchase, looking to get the same amount for it.
ZC transmission
EF front and rear strut tower braces
AEM short ram intake (red)
1991 Honda civic Hatchback (no motor no trans) click the following links for pics:
http://www.geocities.com/mr_cr...1.jpg
http://www.geocities.com/mr_cr...3.jpg
http://www.geocities.com/mr_cr...4.jpg
Off Topic F.s.
slim design PS2 that i bought but only used for like a week. its got an 8mb memory card, gran tursimo 4, tokyo extreme racer, and the game stop brand steering wheel and pedals. asking 150 for all of it. Will part out. Make offers.
This isn’t all of it, but it’s a big chunk of what I have. I’m going to have to walk through the garage and write down everything I have.
Modified by thapimpfromchi at 1:33 PM 12/31/2005
Modified by thapimpfromchi at 1:40 PM 12/31/2005
Head Stuff:
ITR Intake Manifold w/IAC $200
JDM B16 Head, Ported and Polished, milled .030, ITR Valves, ITR Valve Springs, ITR Inner Valve Springs, 3-angle valve job, Vtec Solinoid, B16 Valve Cover, etc..., $550 (will not part out)
99' B16 Throttle Body w/all sensors $75
JDM B16 Cams and Gears $30
Wiring:
95' GSR Complete Wiring Harness $125
Trans:
95' GSR Transmission (no grinds) $700
OEM GSR Preesure plate $20
ACT Street Disc (plenty of meat) $25
B16 OEM Flywheel $25
95' GSR Shift Linkage $75
Short Block:
95' USDM GSR Block w/JDM ITR Pistons (11:4 - 11:7 Compression depending on the head and head gasket), GSR Rods, Balanced & Blueprinted, all new hardware (bearings, gaskets, etc..) new Water Pump, Timing Belt, and Tensioner (7K miles after re-build) $850
Misc:
Integra Motor Mounts (T-mount, passenger and driver) $50
ITR Intake Manifold w/IAC $200
JDM B16 Head, Ported and Polished, milled .030, ITR Valves, ITR Valve Springs, ITR Inner Valve Springs, 3-angle valve job, Vtec Solinoid, B16 Valve Cover, etc..., $550 (will not part out)
99' B16 Throttle Body w/all sensors $75
JDM B16 Cams and Gears $30
Wiring:
95' GSR Complete Wiring Harness $125
Trans:
95' GSR Transmission (no grinds) $700
OEM GSR Preesure plate $20
ACT Street Disc (plenty of meat) $25
B16 OEM Flywheel $25
95' GSR Shift Linkage $75
Short Block:
95' USDM GSR Block w/JDM ITR Pistons (11:4 - 11:7 Compression depending on the head and head gasket), GSR Rods, Balanced & Blueprinted, all new hardware (bearings, gaskets, etc..) new Water Pump, Timing Belt, and Tensioner (7K miles after re-build) $850
Misc:
Integra Motor Mounts (T-mount, passenger and driver) $50
Trending Topics
14" Mugen MR5's. Wheels are in prefect condition; Got them a little over 1.5 years ago only used them for about 6 months and when I got them 2 wheels were brand new in Mugen box never used and the other 2 are in just as good condition. Comes with all season BFGoodrich tires lots of tread left 195/60/14 $650 picked-up or shipping them without tires for $650 shipped
Sparco Harness Bar for 94-01 Integra this is brand new never used, mounted. It goes directly behind the 2 front seats and you can still reatine your back seats without a problem. Direct bolt in. $325 picked-up $355 shipped
Milwaukee, WI
Sparco Harness Bar for 94-01 Integra this is brand new never used, mounted. It goes directly behind the 2 front seats and you can still reatine your back seats without a problem. Direct bolt in. $325 picked-up $355 shipped
Milwaukee, WI
For Sale:
1. 93 OEM Honda NSX front lip(black plastic, used condition)$10
2. Mystery front lip(think its from a newer miata, like mugen eg lip, mint)black plastic $10
3. JUN II intake cam(B-series, 500 miles of use, perfect for b16 with CTR ex cam)$300obo
4. GSXR 1000 ITB's(need premanifold, injectors, vacumn log, couplers, clamps, velocity stacks)$150obo
5. JDM EG6 SIR intake elbow(complete, uber-clean)$50obo
6. JDM EG6 SIR filter box(complete, clean)$40obo
7. Exedy organic pressure plate, disc, throwout bearing, new pilot bearing(30k miles of use)$30
8. Spoon aluminum shift ****(recentley re-polished, no sticker, mint)$40
9. Vibrant 4-2-1, 2.5 collector, stainless steel, DEI heat wrapped, small dent $300obo
10. B18B cams and gears $10
11. B16A cams and gears $40
12. P30 intake manifold $30
13. JUN B-series cam gears(used, rusty like oem b-series cam gears) $200obo
WTT:
my JDM CTR/ITR valve cover(cam gear cover completley removed, red wrinkle coat, mint condition)
....for your jdm B16 black wrinkle coat valve cover in mint condition
Feel free to come look at anything your interested in
PM ME!
1. 93 OEM Honda NSX front lip(black plastic, used condition)$10
2. Mystery front lip(think its from a newer miata, like mugen eg lip, mint)black plastic $10
3. JUN II intake cam(B-series, 500 miles of use, perfect for b16 with CTR ex cam)$300obo
4. GSXR 1000 ITB's(need premanifold, injectors, vacumn log, couplers, clamps, velocity stacks)$150obo
5. JDM EG6 SIR intake elbow(complete, uber-clean)$50obo
6. JDM EG6 SIR filter box(complete, clean)$40obo
7. Exedy organic pressure plate, disc, throwout bearing, new pilot bearing(30k miles of use)$30
8. Spoon aluminum shift ****(recentley re-polished, no sticker, mint)$40
9. Vibrant 4-2-1, 2.5 collector, stainless steel, DEI heat wrapped, small dent $300obo
10. B18B cams and gears $10
11. B16A cams and gears $40
12. P30 intake manifold $30
13. JUN B-series cam gears(used, rusty like oem b-series cam gears) $200obo
WTT:
my JDM CTR/ITR valve cover(cam gear cover completley removed, red wrinkle coat, mint condition)
....for your jdm B16 black wrinkle coat valve cover in mint condition
Feel free to come look at anything your interested in
PM ME!
FS: 1991 Honda civic hatchback no shell. body kit, full interior. 800 firm.
93 DX motor (recently bought from midwesta, paid 150. looking to get the same amount. never installed)
ZC 5-spd trans B.O.
this is such a head ache. i give up. its all for sale. needs to be gone asap. make offers.
Modified by thapimpfromchi at 11:32 AM 12/31/2005
93 DX motor (recently bought from midwesta, paid 150. looking to get the same amount. never installed)
ZC 5-spd trans B.O.
this is such a head ache. i give up. its all for sale. needs to be gone asap. make offers.
Modified by thapimpfromchi at 11:32 AM 12/31/2005
Honda-Tech Member
iTrader: (1)
Joined: Aug 2002
Posts: 8,117
Likes: 0
From: Jordan Michael, Minnesotian
Everything is BEST OFFER. So IM me a reasonable price
ek:
1. stock springs
2. p2p ecu (99-00 ex)
3. 99-00 si ecu
4. koni reds with teins
-the passenger shock is broken, but will include a stock one
5. 97 dx ecu
6. d-series ps pump
7. d-series obd2a and obd2b dizzy
dc2:
1. 98 gsr longblock --1400/OBO
-compression is 204, 200, 200, 205
-smokes a little when driven hard
-has vtec issues
-has new oem head gasket
-has new arp headstuds
2. 98 gsr tranny-550 FIRM
-mint condition but has an axle head in the passenger side of the tranny
3. sk2 IM
4. obd2a p72-sold
misc:
1. (3 rims), possible 4 (if i can find it)..5 spoke 17 inch rims with tires
2. euro taillights (no flaming, came with the car)
3. gsr valve cover
4. cx tranny (never used it)
5. obd1 and obd2 240 cc injectors with stock fuel rail
6. b-serires shift linkage
7. d-series shift linkage
8. lots of mounts from d and b
9. gsr TB with broken TPS
cars for sale-
1. 00 ej8 with jdm 5 lug and gsr motor- 8900
2. 98 ssbp gsr-8000
ek:
1. stock springs
2. p2p ecu (99-00 ex)
3. 99-00 si ecu
4. koni reds with teins
-the passenger shock is broken, but will include a stock one
5. 97 dx ecu
6. d-series ps pump
7. d-series obd2a and obd2b dizzy
dc2:
1. 98 gsr longblock --1400/OBO
-compression is 204, 200, 200, 205
-smokes a little when driven hard
-has vtec issues
-has new oem head gasket
-has new arp headstuds
2. 98 gsr tranny-550 FIRM
-mint condition but has an axle head in the passenger side of the tranny
3. sk2 IM
4. obd2a p72-sold
misc:
1. (3 rims), possible 4 (if i can find it)..5 spoke 17 inch rims with tires
2. euro taillights (no flaming, came with the car)
3. gsr valve cover
4. cx tranny (never used it)
5. obd1 and obd2 240 cc injectors with stock fuel rail
6. b-serires shift linkage
7. d-series shift linkage
8. lots of mounts from d and b
9. gsr TB with broken TPS
cars for sale-
1. 00 ej8 with jdm 5 lug and gsr motor- 8900
2. 98 ssbp gsr-8000
F.S:
http://www.geocities.com/mr_cr...1.jpg
http://www.geocities.com/mr_cr...3.jpg
http://www.geocities.com/mr_cr...4.jpg
car comes with no motor no trans. 800 firm.
http://www.geocities.com/mr_cr...1.jpg
http://www.geocities.com/mr_cr...3.jpg
http://www.geocities.com/mr_cr...4.jpg
car comes with no motor no trans. 800 firm.
95 gsr transmission: needs input shaft bearing and maybe 3rd gear synchro: 300 obo
dc5 Seibon carbon fiber hood: only used in summer months, stored during winter: 250 obo
dc5 Seibon carbon fiber hood: only used in summer months, stored during winter: 250 obo



