WTB: Anything for d series turbo
Thread Starter
Junior Member
Joined: Feb 2005
Posts: 812
Likes: 0
From: ATL, GA
WTB: Anything for d series turbo
I want to turbo my d16y8 in my 98 civic and I'm looking for all turbo parts. Must be A/C and power steering compatible. I'm starting from scratch so I don't have anything. Show me what you got. I can also pick up in the Atlanta area. I already have the money ready so if I see something I want I'll get it.
Stuff I already have:
Revhard manifold flanged for T3 turbo and external wastegate
T3 turbo
Downpipe
Intercooler
oil ines
Stuff I need:
charge piping
bov
wastegate
OBD2a to OBD1 conversion harness
dsm injectors
Modified by bebfsu1 at 8:12 PM 1/18/2006
Stuff I already have:
Revhard manifold flanged for T3 turbo and external wastegate
T3 turbo
Downpipe
Intercooler
oil ines
Stuff I need:
charge piping
bov
wastegate
OBD2a to OBD1 conversion harness
dsm injectors
Modified by bebfsu1 at 8:12 PM 1/18/2006
Joined: Apr 2004
Posts: 618
Likes: 0
From: Burlington, Vermont, USA
Re: WTB: Anything for d series turbo (bebfsu1)
i have one. Heres a list of it...
-Garret T25
-Honda Cast-Iron Turbo Manifold (heat wrapped)
-Garret Turbo Exhaust Off Pipe (w/ extra 02 bung)
-2.75 Inch Custom Down Pipe
-12 psi wastegate (internal)
-Braided Stainless Steel Oil Feed lines (w/heat sheild wrap)
-Aeroquip Oil LineMiddle Section Union
-3/4ths Oil Return Line (w/heat sheild wrap)
-Mandel Filter to turbo Inlet piping
-New Filter
-Mandrel Bent intake pipe.
-Black Silcone Couplers
-Bosche Blow Of Valve
-GM Map Sensor
-DSM 390cc Injectors
-DSM Clips
-Honda Injector Rresistor Box
-Boost/Vac gauge (-30/30)
-Greddy Turbo Timer
-Walbro 255 Fuel Pump (*New* Still in packaging)
-Various (oil) Fittings
(I believe thats it)
Pratically a "bolt on and go" Complete kit... really all you will need is a Intercooler, and something to run the injectors (afc, hondata, emanage, etc). This also allows YOU to choose what type of intercooler you would like and what system you wanna run. I had this on my D15 (70 hp model) '93 hatchy, for about 800 miles. i don't drive the car very often, and i have been parting it out. this is the last thing to go before the shell. I have been debating on where to sell the kit with the car or not. But you give me a offer on it and if its somehting i like its yours.
The turbo pulls wicked hard. i never dyno'd it or track tested it thou. But i did race a Modd'd Subaru STI and stayed side by side with him the whole time. i was impressed.
I can supply pics. the reason i have no intercooler for the kit is cuz i used a top mount which ment for me to either to ride with no hood or i had to cut my hood. i did that evently. Which if you want to see pics of the kit, you will see how i set it up.
I'm getting out of cars... Heading back to my roots of music, so like i said give me a offer on it and if its somehting i like its yours.
Danny
:edit:
Oh i have a nice side mount intercooler i can thou in if you want. obtain the sleeper look
-Garret T25
-Honda Cast-Iron Turbo Manifold (heat wrapped)
-Garret Turbo Exhaust Off Pipe (w/ extra 02 bung)
-2.75 Inch Custom Down Pipe
-12 psi wastegate (internal)
-Braided Stainless Steel Oil Feed lines (w/heat sheild wrap)
-Aeroquip Oil LineMiddle Section Union
-3/4ths Oil Return Line (w/heat sheild wrap)
-Mandel Filter to turbo Inlet piping
-New Filter
-Mandrel Bent intake pipe.
-Black Silcone Couplers
-Bosche Blow Of Valve
-GM Map Sensor
-DSM 390cc Injectors
-DSM Clips
-Honda Injector Rresistor Box
-Boost/Vac gauge (-30/30)
-Greddy Turbo Timer
-Walbro 255 Fuel Pump (*New* Still in packaging)
-Various (oil) Fittings
(I believe thats it)
Pratically a "bolt on and go" Complete kit... really all you will need is a Intercooler, and something to run the injectors (afc, hondata, emanage, etc). This also allows YOU to choose what type of intercooler you would like and what system you wanna run. I had this on my D15 (70 hp model) '93 hatchy, for about 800 miles. i don't drive the car very often, and i have been parting it out. this is the last thing to go before the shell. I have been debating on where to sell the kit with the car or not. But you give me a offer on it and if its somehting i like its yours.
The turbo pulls wicked hard. i never dyno'd it or track tested it thou. But i did race a Modd'd Subaru STI and stayed side by side with him the whole time. i was impressed.
I can supply pics. the reason i have no intercooler for the kit is cuz i used a top mount which ment for me to either to ride with no hood or i had to cut my hood. i did that evently. Which if you want to see pics of the kit, you will see how i set it up.
I'm getting out of cars... Heading back to my roots of music, so like i said give me a offer on it and if its somehting i like its yours.
Danny
:edit:
Oh i have a nice side mount intercooler i can thou in if you want. obtain the sleeper look
Trending Topics
$100 
Joined: Mar 2003
Posts: 967
Likes: 0
From: Hilliard, OH
Re: WTB: Anything for d series turbo (bebfsu1)
i'm parting out my car. i never got to finish it so everything is still new & in the box. i have pics.
tial 38mm wastegate $210 shipped
hks ssqv $210 shipped
rev hard turbo manifold $150 shipped
spearco fmic $300 shipped
autometer gauges- oil pressure $50 shipped, egt $50 shipped, air/fuel $50 shipped, boost $50 shipped
Walbro 255lph fuel pump $100 shipped
* Or buy it all for $1,150*
tial 38mm wastegate $210 shipped
hks ssqv $210 shipped
rev hard turbo manifold $150 shipped
spearco fmic $300 shipped
autometer gauges- oil pressure $50 shipped, egt $50 shipped, air/fuel $50 shipped, boost $50 shipped
Walbro 255lph fuel pump $100 shipped
* Or buy it all for $1,150*
Thread Starter
Junior Member
Joined: Feb 2005
Posts: 812
Likes: 0
From: ATL, GA
Re: WTB: Anything for d series turbo (V12EATER)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by V12EATER »</TD></TR><TR><TD CLASS="quote">i'm parting out my car. i never got to finish it so everything is still new & in the box. i have pics.
tial 38mm wastegate $210 shipped
hks ssqv $210 shipped
rev hard turbo manifold $150 shipped
spearco fmic $300 shipped
autometer gauges- oil pressure $50 shipped, egt $50 shipped, air/fuel $50 shipped, boost $50 shipped
Walbro 255lph fuel pump $100 shipped
* Or buy it all for $1,150*</TD></TR></TABLE>
pm sent
tial 38mm wastegate $210 shipped
hks ssqv $210 shipped
rev hard turbo manifold $150 shipped
spearco fmic $300 shipped
autometer gauges- oil pressure $50 shipped, egt $50 shipped, air/fuel $50 shipped, boost $50 shipped
Walbro 255lph fuel pump $100 shipped
* Or buy it all for $1,150*</TD></TR></TABLE>
pm sent
Thread Starter
Junior Member
Joined: Feb 2005
Posts: 812
Likes: 0
From: ATL, GA
Re: WTB: Anything for d series turbo (xCIVICx)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xCIVICx »</TD></TR><TR><TD CLASS="quote">i have a extra set of oil lines. Send & Return. 28 bucks shipped!!!
pm'd
and vtecb20coupe has a walbro 255 fuel pump for $60.
</TD></TR></TABLE>
Thanks for offering the oil lines but if anyone else is wondering, I would rather buy the oil lines and all the fittings together. This is my first time with turbo so I'm trying to make it easier on me.
pm'd
and vtecb20coupe has a walbro 255 fuel pump for $60.
</TD></TR></TABLE>
Thanks for offering the oil lines but if anyone else is wondering, I would rather buy the oil lines and all the fittings together. This is my first time with turbo so I'm trying to make it easier on me.
Joined: Nov 2005
Posts: 1,295
Likes: 0
From: SGV, CA