I would like to see some stock intake B swaps

Trying to make my engine bay look as OE as possible.

 

running the JDM EF8 airbox. I was just cleaning it tonight, waiting for it to dry and then I'll be putting on the new airbox sticker. I'll take some pictures when the is actually running.

 

runnin 94 eg si box with 96 ls intake arm

 

I like that a lot ^ but I don't want to relocate my battery to the trunk even though I've seen pictures of people running their battery below the stock battery tray. I have stock intake box with a kn drop in filter, its nothing special.

 

before i found a jdm intake, i ran the d16 box with a DA arm. the DA arm was longer than the stock one, so i had to cut the factory box (arm part).

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sgt_Ox &raquo;</TD></TR><TR><TD CLASS="quote">running the JDM EF8 airbox. I was just cleaning it tonight, waiting for it to dry and then I'll be putting on the new airbox sticker. I'll take some pictures when the is actually running.</TD></TR></TABLE> running same thing on a b17. 14.05 with exhauast and jdm ef air box. I am sure there's alot of room for improvement, but with my 2.25 exhaust and stock airbox the car is very quiet.

 

jdm eg airbox, 93 integra arm, b18a engine.

 

looks awesome

anymore?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Stoich &raquo;</TD></TR><TR><TD CLASS="quote">I would like to see some stock intake B swaps

Trying to make my engine bay look as OE as possible.</TD></TR></TABLE>

Just keep in mind that B-series swaps don't like the stock airbox. From my experience, power losses are quite heavy if you decide to ditch a proper intake in favor of the stock airbox.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StorminMatt &raquo;</TD></TR><TR><TD CLASS="quote">Just keep in mind that B-series swaps don't like the stock airbox</TD></TR></TABLE>

Yeah, the R motor in mine is probably pretty pissed at me. I have a short ram to put on if I ever get off my *** and do it.

 

I'm running the same setup as eggman's old one
edit my pic isnt working

 

 

Here's the EF8 air box and tube.

 

i'm using a 94 gsr intake tube and box with a k&n
works great

 

Sgt_Ox

nice very nice

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ef2_civic &raquo;</TD></TR><TR><TD CLASS="quote">Sgt_Ox

nice very nice </TD></TR></TABLE>
thanks, I had to make brackets for the other 2 mounting points (the airbox only came with the strut tower bracket). So my airbox is bolted down by all 3 points now.

I'm also using an JDM EF8 OEM shaped K&N filter. Took a little research, but I have the K&N part number laying around somewhere.